Craftsman 572.6112 owner manual Accessories

ACCESSORIES

For availability of all accessories and attachments, refer your local Sear center.

! WARNING Use only Craftsman, high-performance accessories. Other accessories are not designed for this tool and may lead to personal injury or

property damage.

Drywall Cutting Bit Tile Cutting Bit

When using a template (outlet box) behind the drywall, cut in a counterclockwise direction.

High Speed Router Bits

For routing, inlaying and mortising in wood and other soft materials. Use only with Craftsman Router Attachment or Shape/Router Table.

Mandrels

A mandrel is a shank with a threaded or screw head used with polishing accessories, cutting wheels, sanding discs and polishing points. The mandrel is a permanent shank, allowing for replacement of the worn head when necessary.

Screw Mandrel

For use with the felt polishing 1/8" shank tip and felt polishing wheels.

Aluminum Oxide Grinding

Stones (red/brown)

These grinding stones 1/8" shank come round, pointed or flat

and are made of aluminum

oxide. Use them for every possible grinding operation: sharpening lawn mower blades, screwdriver tips, knives, scissors, chisels and other cutting tools. Use to remove flash from metal castings, deburring any kind of metal. These grinding stones can be resharpened with a dressing stone. In machine shops, high speed drills and cutters are normally ground with aluminum oxide wheels.

For use with wall tile, cement board and plaster.

Start the bit into the material at a 45° angle and then slowly bring it to a 90° angle to

Multipurpose Cutting Bit

For use in wood, plastics, drywall, fiberglass, vinyl or aluminum siding, acoustical tile and laminates.

Start the bit into the material at a 45° angle and then slowly bring it to a 90° angle to begin the cut.

Small Screw Mandrel
Mandrel has a small screw		1/8" shank
at the tip and is used with
emery and fiberglass cutting
wheels, sanding discs and
polishing wheels.
Threaded Tip Mandrel
Mandrel has a threaded tip		1/8" shank
which threads	into the
polishing point accessory
#427.
Silicon Carbide Grinding
Stones (blue/green)		1/8" shank
Tougher than	aluminum
oxide points, these are made especially for
use on hard materials such as glass and
ceramics.
Diamond Wheel Points
Used for fine detail work on		3/32" shank
wood, jade, ceramic, glass
and other hard material. Bits
are covered with diamond
particles.

16