en
b)Ensure that the workplace is well ventilated. Exposure to dust at a poorly ventilated workplace may result in damage to the health.
c)If the work involves breaking right through, take the appropriate safety measures at the opposite side. Parts breaking away could fall out and / or fall down and injure other persons.
d)Be sure to keep an adequate distance from other persons and adjacent objects. If necessary, cor- don off the area in which you are working.
5.2.6 Personal protective equipment
The user and any other persons in the vicinity must wear ANSI
6. Before use
CAUTION
The power tool must be disconnected from the electric supply.
CAUTION
Check the insert tool for damage each time before use.
6.1Unlocking the power tool (theft protection system)
NOTE
See section “Using the TPS Theft Protection System”.
6.2Use of extension cords and generators or transformers
Please refer to section 2 “Description”.
6.3 Transport
CAUTION
Use the transport trolley or other means of con- veyance whenever possible. The power tool should always be carried by two persons if no transport trolley or means of conveyance is available for use. Be aware that the power tool plus transport trolley present a considerable weight.
CAUTION
Do not park the transport trolley on an incline.
CAUTION
Take care to use only safe transport routes.
CAUTION
Take care to ensure that the trolley stands in a steady, secure position.
6.4Securing the power tool and chisels on the transport trolley 3
Place the power tool on the locating pin provided on the transport trolley and always secure it for transport by closing the retaining bar.
Put the chisels in the holder provided, pushing them in as far as they will go until held securely.
8