Obligation signs
en | Wear eye | Wear a hard | Wear ear | Wear | |
protection | hat | protection | protective | ||
|
gloves
Wear safety | Wear |
shoes | breathing |
| protection |
Symbols
Read the | Return waste | Volts | Amps |
operating | material for |
|
|
instructions | recycling. |
|
|
before use |
|
|
|
Alternating | Hertz | Lock symbol | Equipped with |
current |
|
| theft |
|
|
| protection |
|
|
| system |
Location of identification data on the power tool The type designation and serial number can be found on the type identification plate on the machine or tool. Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department.
Type:
Generation: 02
Serial no.:
2. Description
2.1 Use of the product as directed
The power tool is a
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed.
Its typical working environment is construction sites of all kinds and it may be used for construction work, finishing, renovation, demolition and road work.
The power tool may be used only in a dry environment.
Do not use the power tool where there is a risk of fire or explosion.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in compliance with the information given on its type identification plate.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance. Modification of the power tool or tampering with its parts is not permissible.
2