Hilti TE3000-AVR operating instructions Disposal, Manufacturer’s warranty tools

en

Fault	Possible cause	Remedy
The power tool doesn’t start	The power tool has not been	Use the TPS key to unlock the power
and the indicator lamp blinks	unlocked (power tools with optional	tool.
yellow.	theft protection system).
The power tool doesn’t start	The extension cord is too long or its	Use an extension cord of an
or cuts out during operation.	gauge is inadequate.	approved length and / or of
		adequate gauge.

NOTE

If the fault cannot be eliminated by the measures listed above, have the power tool checked by Hilti Service.

10. Disposal

Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or Hilti representative for further information.

11. Manufacturer’s warranty - tools

Hilti warrants that the tool supplied is free of defects in material and workmanship. This warranty is valid so long as the tool is operated and handled correctly, cleaned and serviced properly and in accordance with the Hilti Operating Instructions, and the technical system is maintained. This means that only original Hilti consumables, components and spare parts may be used in the tool.

This warranty provides the free-of-charge repair or replacement of defective parts only over the entire lifespan of the tool. Parts requiring repair or replace- ment as a result of normal wear and tear are not covered by this warranty.

Additional claims are excluded, unless stringent na- tional rules prohibit such exclusion. In particular, Hilti is not obligated for direct, indirect, inciden- tal or consequential damages, losses or expenses in connection with, or by reason of, the use of, or inability to use the tool for any purpose. Im- plied warranties of merchantability or fitness for a particular purpose are specifically excluded.

For repair or replacement, send the tool or related parts immediately upon discovery of the defect to the address of the local Hilti marketing organization provided.

This constitutes Hilti’s entire obligation with regard to warranty and supersedes all prior or contempo- raneous comments and oral or written agreements concerning warranties.

12