Hitachi H 65SC instruction manual OIL Filling

Page 12

English

CAUTION: After long time of use, the front cover becomes hot. Therefore, be careful not to burn your hands.

OIL FILLING

CAUTION: Prior to oil filling, always disconnect the plug form the receptacle.

Since an oil chamber is built in this Hitachi Demolition Hammer, it can be used for approximately 20 days without supplying lubricating oil, assuming that the Hammer is used continuously 3 – 4 hours daily.

Fill oil into the oil tank as described below before using this Hammer. (See Figs. 5 and 6)

1.Just before no oil is visible in the oil gauge window when the power tool is held upright, fill oil without fail.

2.Before filling oil, use the provided wrench to remove the oil gauge.

Be careful not to lose the rubber packing attached below the oil gauge.

3.Check the oil level once a day, confirming that oil is filled.

4.After filling with oil, securely clamp the oil gauge.

NOTE:

As an optional accessory, oil for the Hitachi Electric Hammer (one liter) is sold separately. Use this oil when oil in the tank is depleted.

Oil Gauge

Check the oil quantity by holding the body upright.

Fig. 5

15/128" (3 mm)

Resupply oil when the oil level drops to less than approx. 15/128" (3 mm)

Fig. 6

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 65SC AvertissementContents Meanings of Signal Words Important InformationSafety General Safety RulesEnglish Specific Safety Rules and Symbols Carefully handle power tools Do not wipe plastic parts with solventMake Them Available to Other Users of this Tool Double Insulation for Safer OperationSpecifications Functional DescriptionName of Parts Assembly and Operation ApplicationsPrior to Operation HOW to USE the Demolition Hammer OIL Filling Maintenance and Inspection Accessories Standard AccessoriesSold separately English Informations Importantes Signification DES Mots D’AVERTISSEMENTSecurite Regles Generale DE SecuriteConserver CES Instructions Avertissement Lire et coxmprendre toutes les instructionsFrançais Regles DE Securite Specifiques ET Symboles Garder propres les évents d’air du moteurUtiliser l’outil motorisé à la tension nominale Ne pas essuyer les parties en plastique avec du solvantDouble Isolation Pour UN Fonctionnement Plus SUR Description Fonctionnelle NOM DES PartiesAvant L’UTILISATION Comment Utiliser LE Marteau Piqueur Remplissage D’HUILE Service apres-vente et reparations Entretien ET InspectionInspection de l’outil Inspection des vis de montageAccessoires Accessoires StandardFrançais Información Importante Significado DE LAS Palabras DE SeñalizaciónSeguridad Normas Generales DE SeguridadGuarde Estas Instrucciones Advertencia Lea y entienda todas las instruccionesEspañol Page Maneje con cuidado las herramientas eléctricas No limpie las partes de plástico con disolventeAislamiento Doble Para Ofrecer UNA Operación MÁS Segura Descripción Functional NomenclaturaEspecificaciones Montaje Y Operación AplicacionesAntes DE LA Operación Forma DE Usar EL Martillo Demoledor Instalación de herramientasRelleno DE Aceite Mantenimiento E Inspección Inspección d la herramientaInspección de los tornillos de montaje Inspeccionar los carbones de contacto FigAccesorios Accesorios EstándarEspañol Page 6MM Itachi Koki Canada Co

H 65SC specifications

The Hitachi H 65SC is a prominent member of the company's esteemed lineup of excavators, showcasing advanced engineering and technology designed for versatility and efficiency. Aimed primarily at the construction and earth-moving sectors, the H 65SC combines power with precision to deliver exceptional performance in various applications.

One of the standout features of the H 65SC is its robust hydraulic system. The excavator is equipped with a high-performance hydraulic pump that ensures optimal flow and pressure for enhanced digging and lifting capabilities. This powerful hydraulic configuration allows for smoother operation and reduces cycle times, ultimately increasing productivity on the job site.

The H 65SC is powered by a reliable and efficient diesel engine that provides impressive output while adhering to stringent emissions standards. This engine not only guarantees high performance but also promotes fuel economy, making it a cost-effective choice for contractors. The intelligent design of the engine management system optimizes fuel consumption, further contributing to the machine's operational efficiency.

The excavator's excavating arm is designed with a focus on durability and strength. Made from high-quality materials, the arm features reinforced components that can withstand the rigors of heavy-duty work. This ensures a longer lifespan and reduced maintenance costs, valuable traits for any contractor looking to maximize their investment.

In terms of operator comfort, the Hitachi H 65SC does not disappoint. The spacious cab is designed ergonomically, providing operators with optimal visibility and control. An advanced suspension seat, adjustable controls, and climate control options enhance the overall working experience, reducing fatigue during long shifts. The cab's layout ensures that all necessary functions are within easy reach, allowing for seamless operation.

Another innovative aspect of the H 65SC is its advanced monitoring system. This system provides real-time feedback on machine performance, maintenance needs, and fuel usage. By keeping operators informed, this technology enables proactive maintenance and operational efficiency, ultimately prolonging the life of the machine.

With its combination of power, efficiency, and operator-focused design, the Hitachi H 65SC represents a solid choice for those in need of a reliable excavator. Its features and technologies reflect Hitachi's commitment to innovation and quality, marking it as a significant player in the competitive excavator market.
Top Page Image Contents