Chicago Electric 94761 manual Specific Safety Rules, Bulb Replacement

Page 7

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

SPECIFIC SAFETY RULES

WARNING:When using outdoor use portable lamps, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following:

READ ALL INSTRUCTIONS

Use only three-wire outdoor extension cords that have three-prong groundling plugs and grounding receptacles that accept the appliance’s plug.

Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the wet location portable lamp. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.

Use only with an extension cord for outdoor use, such as an extension cord of cord type SW, SW-A, SOW, SOW-A, STW, STWOA, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, or SJTOW, SJTOW-A.

SAVE THESE INSTRUCTIONS

Operation Instructions

1.Press the Switch (16) once to turn the light on and again to turn the light off.

2.To adjust the angle of the Worklight, set the Worklight down and turn the round adjusting knob on the side of the Worklight counter-clockwise.

3.Once loosened, the body of the Worklight can be adjusted to move up or down. Turn the adjusting knob clockwise to the tighten the knob and lock the Worklight body in place.

Bulb Replacement

1.Unplug the lamp and allow the bulb to cool completely.

2.Peel back the covers of the four Tap Screws (1) that are located on the top, bottom, right and left sides of the Lamp Cover (2).

94761

For technical questions, please call 1-800-444-3353.

English Page

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Portable Fluorescent Worklight For technical questions or replacement parts, please callWork Area General Safety RulesElectrical Safety Save This ManualLight Use And Care Personal SafetyGrounding ServiceGrounded Lights Lights With Three Prong Plugs See Figure C Double Insulated Lights Lights With Two Prong PlugsExtension Cords See Figure C, next120 or 240 Volt SymbologyNameplate Extension Cord Length FeetBulb Replacement Specific Safety RulesDo not use damaged equipment INSPECTION, MAINTENANCE, and CleaningPlease Read the Following Carefully Parts ListPart Description ’ty Record Product’s Serial Number Here Assembly DiagramLampe Fluorescente Portable Gardez ce Manuel SpécificationsChantier Le Sûreté Personnelle Le Sûreté ÉlectriqueEmploi ET Maintient DE Cette Lampe Mise À LA Terre ServiceCordons Prolongateurs Lampes Mises Àterre Lampes Avec Fiches Detrois Fourchons’image a 120 OU 240 Volt Ampères Longueur DE Cordon ProlongateurComplet PiedsRègles DE Sécurité Spécifiques Désemballage’utilisez pas d’équipement abîmé Mode D’EMPLOIRemplacement De L’ampoule INPECTION, Maintient ET NettoyagePartie Description ’té Liste DES PartiesLisez Attentivement CE QUI Suit Tableau D’ASSEMBLAGEÉcrivez le numéro de série ici
Top Page Image Contents