Sanyo PLC-XP55L Adjusting Screen, Keystone Adjustment, Corrected by Keystone adjustment

Page 21

BASIC OPERATION

	ADJUSTING SCREEN

	ZOOM ADJUSTMENT
1	Press ZOOM button on Top Control or ZOOM ▲/▼ button on
1	Remote Control Unit. Message “Zoom” is displayed.
2	Press ZOOM ▲ button or POINT UP button to make image
2	larger, and press ZOOM ▼ button or POINT DOWN button to
	make image smaller.
		Message disappears after 4 seconds.

	FOCUS ADJUSTMENT
1	Press FOCUS button on Top Control or FOCUS ▲/▼ button on
1	Remote Control Unit. Message “Focus” is displayed.
2	Adjust focus of image by pressing FOCUS ▲/▼ button or
2	POINT UP/DOWN button(s) .
	NOTE;	Message disappears after 4 seconds.
	Focus adjustment may not function properly if the image is	Message disappears after 4 seconds.
	Focus adjustment may not function properly if the image is
	corrected by KEYSTONE adjustment.

	LENS SHIFT ADJUSTMENT
1	Press LENS SHIFT button on Top Control or LENS SHIFT ▲/▼
1	button on Remote Control Unit. Message “Lens shift” is
	displayed.
2	Press POINT UP button or LENS SHIFT ▲ button to move
2	image up, press POINT DOWN or LENS SHIFT ▼ button to

move image down.

KEYSTONE ADJUSTMENT

If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment.

1	Press KEYSTONE button on Remote Control Unit or select
1	Keystone on SETTING menu. (Refer to page 37.) Keystone
	dialog box appears.
2	Correct keystone distortion by pressing POINT
2	UP/DOWN/LEFT/RIGHT button(s). Press POINT UP button to

reduce the upper part of the image, and press POINT DOWN button to reduce the lower part. Press POINT LEFT button to reduce the left part, and press POINT RIGHT button to reduce the right part.

•Arrows are white in no correction.

•Arrow(s) of direction being corrected turn(s) red.

•Arrow(s) disappear(s) at the maximum correction.

•If you press the KEYSTONE button on Top Control or on Remote Control Unit once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

Reduce the upper width					Reduce the lower width	Reduce the left part with
with POINT UP button.					with POINT DOWN button.	POINT LEFT button.

Reduce the right part with POINT RIGHT button.

21

Image 21

Contents Model PLC-XP55 To the Owner Voor de klanten in Nederland Safety InstructionsPlummer Street, Chatsworth, California CompliancesTable of Contents Compact Design Digital Zoom for Computer Features and DesignPreparation Name of Each Part of ProjectorHOT AIR Exhausted SETTING-UP Projector Connecting AC Power CordFor Continental Europe For the U.K Room Light Preparation Positioning ProjectorInstalling Projector in Proper Position Preparation Adjustable FeetPreparation Moving Projector Terminals of Projector Connecting ProjectorConnect computer output Digital DVI-D type to this terminal Refer to P13Connecting to Computer TerminalsA Projector Connecting to Video Equipment Inside the Battery Compartment BOX Operation of Remote ControlBefore Operation Laser Pointer FunctionCompartment lid Remove batterySlide batteries into CompartmentTOP Controls and Indicators HOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Used to adjust picture image Press Menu Button while connecting to PC input sourceBefore Operation Menu BAR Used to selectTurning on / OFF Projector Basic OperationTurning on Projector Turning OFF ProjectorKeystone Adjustment Adjusting ScreenFocus adjustment may not function properly if the image is Corrected by Keystone adjustmentSound Adjustment Selecting Input Source Computer InputSelecting Computer System Rgbav HdcpAutomatic MULTI-SCAN System AutoPC System Menu Auto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area Display area HFull screen Image Level Select Direct Picture Image SelectImage Level Select Menu Image Select MenuScreen Menu Picture Screen AdjustmentVideo Input When video input signal is connected to Video jackVideo Select VideoAuto Selecting Video SystemAV System Menu Video or S-VIDEO AV System Menu Component VideoCinema Picture level adjusted for picture with fine toneProvides image at a wide screen ratio of 16 Provides image at a normal video aspect ratio of 4Picture Image Adjustments Image Adjust MenuPicture Image Picture Image List ModeWhite balance Red Color tempWhite balance Green White balance BlueSetting Setting MenuSetting Menu Blue back AnamorphicDisplay Menu positionPower management To change the code of the Remote Control UnitRemote control To change the code of ProjectorProjector mode Wireless Mouse modeLamp counter reset Factory defaultInstallation Operating Wireless MouseOperating Wireless Mouse AppendixMaintenance IndicatorIndicatorStation Cleaning Projection Lens Appendix AIR Filter Care and CleaningRecommendation Pull up and removeLamp Replace Lamp ReplacementReset Lamp Replace Counter Message Lamp replace counter reset? is displayed. MoveAppendix Lamp Replace Counter Pointer to Yes and then press Select buttonTroubleshooting Service Appendix Indicators and Projector Condition Resolution Appendix Compatible Computer SpecificationsPC source Menu TreeSystem Setting Sound Technical Specifications Control Port Connector Appendix Configurations of TerminalsUSB Connector Series B Computer INPUT-1 and Monitor OUT Terminals AnalogAppendix Optional Parts Lens ReplacementAppendix Part No 306 0675 1AA6P1P3948-- MR3A