Sanyo PLC-XP55L owner manual Anamorphic, Blue back, Display, Menu position, Logo, Ceiling, Rear

SETTING

Anamorphic

When this function is “On,” the screen image is forcibly changed to a 4:3 image, even if the input signal is HDTV.

Blue back

When this function is “On,” this projector will produce a blue image instead of the video noise on the screen when any input source is unplugged or turned off.

Display

This function decides whether to display On-Screen Displays. On ··· shows all the On-Screen Displays.

Off ···· sets On-Screen Displays disappeared except;

●ON-SCREEN MENU

●“Power off?” message

●P-TIMER

●“No signal” message

●“Wait a moment” message

Menu position

This function is used to adjust the on-screen menu display position. When a SELECT button is pressed, the adjustment screen is displayed (arrows appear). Use the POINT UP/DOWN/LEFT/RIGHT button(s) to adjust the position. After making the adjustment, press a SELECT button to return to the Menu screen.

Logo

When this function is “On,” projector displays logo when starting up.

Ceiling

When this function is “On,” picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounting the projector.

Ceiling function

Rear

When this function is “On,” picture is left / right reversed. This function is used to project the image to a rear projection screen.

Rear function

Press SELECT button at this icon to display other items.

Press SELECT button at this icon to display previous items.

38