Sanyo POA-CH-EX06 installation manual Securing the projector to the setting plate

Page 7

Installation Procedure

Securing the projector to the setting plate

1 Attach the adjustment unit to the projector using the included 5 screws (M4 x 18).

Screws

Adjustment unit

Projector

English

2 Remove the two bolts (for drop-prevention) from the setting plate. Loosen the four bolts located on the top of the adjustment unit and set the projector with the adjust- ment unit onto the setting plate.

Bolts

Setting plate

Loosen bolts

Projector with the adjustment unit

3 Tighten the four bolts which were loosened to secure the projector to the setting plate. Attach the two bolts (for drop-prevention) to the setting plate.

Bolts

6

POA-CH-EX06(IJAH).indb 6

10.9.8 11:21:14 AM

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model POA-CH-EX06 Explanation of Symbols Safety InstructionsSafety Instructions U i o !0 List of AccessoriesIllustration ¡Confi rm where the beams are within the wall Attach the setting plate to the wall plate Securing the projector to the setting plate Adjust the forward/backward slide Adjustable range 0 180 mm AdjustmentAdjust the vertical tilt Adjustable range +5 Attach the drop-prevention wire to the projector Sanyo PDG-DWL2500 Projection Distance TableDimensions
Top Page Image Contents