Installation Procedure
4 Adjust the vertical tilt (Adjustable range: +5° - –5°)
¡Loosen the screw q located on the left side of the setting plate using the hexagon wrench (3 mm).
¡Turn the adjustment knob w located on the left top side of the setting plate to adjust the vertical tilt.
¡Tighten the screw q which was loosened using the hexagon wrench (3 mm).
knob w | English |
Adjustment |
|
5° | 5° |
Screw q |
|
* “B” marks appear on the setting plate to indicate the locations of the screws and adjustment knob.
5 Adjust the horizontal roll (Adjustable range: +5° - –5°)
¡Loosen the screw q located on the front right side of the setting plate using the hexagon wrench (3 mm).
¡Turn the adjustment knob w located on the right top side of the setting plate to adjust the horizontal roll.
¡Tighten the screw q which was loosened using the hexagon wrench (3 mm).
Adjustment knob w
5° 5°
Screw q
Right side
* “C” marks appear on the setting plate to indicate the locations of the screws and adjustment knob.
8
10.9.8 11:21:14 AM