Installation Procedure
Attach the setting plate to the wall plate
1 Hang the setting plate hook onto the wall plate slits.
Wall plate
Setting plate
2 Tighten the four M8 x 20 mm hexagon socket head cap bolts supplied with the setting plate. (Secure temporarily so that the adjustment men- tioned on page 7 can be carried out.)
Bolts
Bolts
3 Attach the left and right cover plates to the setting plate using the two M5 x 10 mm hexagon socket head cap bolts included. (Secure temporar- ily so that the adjustment mentioned on page 7 can be carried out.)
Bolts
5
10.9.8 11:21:13 AM