Sanyo POA-CH-EX06 installation manual Attach the drop-prevention wire to the projector

Page 10

Attach the drop-prevention wire to the projector

To prevent the projector from falling down, use the included drop-prevention wire to connect the projector and the setting plate.

1 Pass the included drop-prevention wire through the drop-prevention wire installation bar of the projector as shown in the illustration.

Drop-prevention wire

Drop-prevention wire installation bar

2 Pass the wire through the holes of the setting plate as shown in the il- lustration.

3 Secure the end of the wire at the bottom of the setting plate with the screw (M4 x 10) supplied with the setting plate as shown in the illustra- tion.

Screw (M4 x 10)

9

POA-CH-EX06(IJAH).indb 9

10.9.8 11:21:14 AM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model POA-CH-EX06 Safety Instructions Explanation of SymbolsSafety Instructions List of Accessories U i o !0Illustration ¡Confi rm where the beams are within the wall Attach the setting plate to the wall plate Securing the projector to the setting plate Adjustment Adjust the forward/backward slide Adjustable range 0 180 mmAdjust the vertical tilt Adjustable range +5 Attach the drop-prevention wire to the projector Projection Distance Table Sanyo PDG-DWL2500Dimensions
Top Page Image Contents