Jet Tools JBG-6A operating instructions

Page 4

1.For your own safety read instruction manual before operating grinder.

2.Read and understand the entire owner’s manual before attempting assembly or operation.

3.Read and understand the warnings posted on the machine and in this manual. Failure to comply with all of these warnings may cause serious injury.

4.Replace the warning labels if they become obscured or removed.

5.This bench grinder is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a bench grinder, do not use until proper training and knowledge have been obtained.

6.Do not use this bench grinder for other than its intended use. If used for other purposes, Mac Tools disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.

7.Wear eye protection and always use guards and eye shields.

8.Always wear approved safety glasses/face shields while using this bench grinder. Everyday eyeglasses only have impact resistant lenses; they are not safety glasses.

9.Before operating this bench grinder, remove tie, rings, watches and other jewelry, and roll sleeves up past the elbows. Remove all loose clothing and confine long hair. Non-slip footwear or anti-skid floor strips are recommended. Do not wear gloves.

10.Wear ear protectors (plugs or muffs) during extended periods of operation.

11.Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

ˆLead from lead based paint.

ˆCrystalline silica from bricks, cement and other masonry products.

ˆArsenic and chromium from chemically treated lumber.

Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such as face or dust masks that are specifically designed to filter out microscopic particles.

12.Do not operate this machine while tired or under the influence of drugs, alcohol or any medication.

13.Make certain the switch is in the OFF position before connecting the machine to the power supply.

14.Make certain the machine is properly grounded.

15.Make all machine adjustments or maintenance with the machine unplugged from the power source.

16.Remove adjusting keys and wrenches. Form a habit of checking to see that keys and adjusting wrenches are removed from the machine before turning it on.

17.KEEP GUARDS IN PLACE and in working order at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately.

18.Make sure the bench grinder is firmly secured to the floor or bench before use.

19.Check damaged parts. Before further use of the machine, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

20.Provide for adequate space surrounding work area and non-glare, overhead lighting.

4

Image 4
Contents JBG Series Bench Grinders Warranty More InformationTable of Contents Page Page Introduction Specifications JBG-6AContents of the Shipping Container UnpackingAssembly Assembling the Spark Guard and Eye Shield Mounting BracketsInstalling the Spark Guard and Eye Shield Mounting Brackets Tool RestsEye Shields Mounting the GrinderElectrical Electrical RequirementsElectrical Connections Extension CordsAdjustments OperationMaintenance Ring TestCare of Grinding Wheel Changing WheelsWire Wheel Brushes CleaningLubrication Grinding WheelsTroubleshooting Problem Probable Cause RemedyParts and Assembly Parts ListTS-0680031 JBG6A-59A JBG8A-59AAssembly Drawing Wiring Diagram Replacement Parts