DO NOT operate the attached router without an adequate dust collection system. Follow your router manufacturer's specifications for the required dust collection capacity. Failure to use a dust collection system can result in short and
11.Attach the dust port to the back of the fence assembly with the (4)
Figure 16.
Dust Port
Figure 16. Dust port installed.
12.Slide the attached square nut on the guard bracket into the top fence T-slot, center it with the dust hood and dust port, then tighten the cap screw to secure it in place, as shown in
Figure 17.
Guard Bracket
Figure 17. Guard bracket attached to the fence.
To reduce the risk of hand injury from acci- dental contact with the spinning router bit, ALWAYS make sure the fence and router guard are properly positioned and secured before connecting the router to
13.Attach the plastic router guard to the guard bracket with the (2) star knob bolts, as shown in Figure 18.
Star Knobs
Router Guard