Grizzly T10222 owner manual Safety Instructions for Machinery

Page 6

SECTION 1: SAFETY

For Your Own Safety, Read Instruction Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

 

 

Indicates an imminently hazardous situation which, if not avoided,

 

 

 

 

WILL result in death or serious injury.

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

COULd result in death or serious injury.

 

 

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

MAY result in minor or moderate injury. It may also be used to alert

 

 

 

 

against unsafe practices.

NOTICE

This symbol is used to alert the user to useful information about

proper operation of the machine.

Safety Instructions for Machinery

OWNER’S MANUAL. Read and understand this owner’s manual BEFORE using machine. Untrained users can be seriously hurt.

EYE PROTECTION. Always wear ANSI-approved safety glasses or a face shield when operating or observing machinery to reduce the risk of eye injury or blindness from flying particles. Everyday eyeglasses are not approved safety glasses.

HAzARdOUS dUST. Dust created while using machinery may cause cancer, birth defects, or long-term respiratory damage. Be aware of dust hazards associated with each workpiece material, and always wear a NIOSH-approved respirator to reduce your risk.

WEARING PROPER APPAREL. Do not wear clothing, apparel, or jewelry that can become entangled in moving parts. Always tie back or cover long hair. Wear non-slip footwear to avoid accidental slips which could cause a loss of work- piece control.

HEARING PROTECTION. Always wear hear- ing protection when operating or observiing loud machinery. Extended exposure to this noise without hearing protection can cause permanent hearing loss.

MENTAL ALERTNESS. Be mentally alert when running machinery. Never operate under the influence of drugs or alcohol, when tired, or when distracted.

-4-

Model T10222 (Mfg. Since 12/09)

Image 6
Contents Router Table Attachment Page Table of Contents Important NoticeContact Info IntroductionManual Accuracy Tool DescriptionMachine Data Sheet Safety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Router Tables Unpacking SetupNeeded for Setup Description QtyInventory Shipping inventory items A-BAssembly To assemble and install your router table attachmentCut-Out Knurled fence handles installed Guard bracket attached to the fence Router Installation To install a routerOperations Operation OverviewWorkpiece Inspection Edge Jointing To joint the edge of a workpieceTo cut a groove into the face of the workpiece Groove CuttingRouting Small Stock To make a zero-clearance fenceFree-Hand Routing Example of using a jig with a starting Block To free-hand routeSchedule MaintenanceCleaning Protecting Daily CheckParts Table PartsFence Parts Warranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY