Grizzly G0528 Miter, To attach the sliding table, To attach the router to the table

Miter Router To Table

Components Needed:	Qty
Miter Fence	1
Miter Plate	1
To attach the sliding table:

1.Secure the miter plate to the sliding table by sliding the T-bolts into the table T-track.

Components Needed:	Qty
Router Clamps	4
Tools Needed:
10mm Wrench	1
14mm Wrench	1
To attach the router to the table:

2.	Position the miter plate in the desired posi-	1.
	tion and tighten the threaded star knobs.
	Note—Do not worry about precise placement
	of the of the miter plate at this time.
3.	Secure the miter fence to the miter plate with
	the threaded star knobs (Figure 11).

Miter Fence
	Threaded
	Star
Miter Plate	Knobs
	2.

Figure 11. Installed sliding table fence.

Lift the table assembly up and engage the table braces on each side. Note—Ensure that the table brace lock tabs are engaged completely around the lock screws (Figure 12).

Lock Screw

Table Brace	Locked Position
Lock Tab
Figure 12. Locked table brace.
Slide each of the four router clamps into the
T-slots on the underside of the cast iron table
(Figure 13).

T-Slots

	Router Clamps
G0528 Sliding Router Table	Figure 13. Installing the router clamps
	-15-