Grizzly G0528 instruction manual Safety Instructions For Power Tools

Page 4

SECTION 1: SAFETY

For Your Own Safety Read Instruction Manual Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

 

Indicates an imminently hazardous situation which, if not avoided,

 

 

WILL result in death or serious injury.

 

Indicates a potentially hazardous situation which, if not avoided,

 

COULD result in death or serious injury.

 

Indicates a potentially hazardous situation which, if not avoided,

 

MAY result in minor or moderate injury. It may also be used to alert

 

against unsafe practices.

NOTICE

This symbol is used to alert the user to useful information about

proper operation of the equipment.

Safety Instructions For Power Tools

1.KEEP GUARDS IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of checking to see that keys and adjusting wrenches are removed from tool before turning on.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.NEVER USE IN DANGEROUS ENVIRONMENT. DO NOT use power tools in damp or wet locations, or where any flammable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept at a safe distance from work area.

6.MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.

7.NEVER FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE RIGHT TOOL. DO NOT force tool or attachment to do a job for which it was not designed.

-2-

G0528 Sliding Router Table

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Router Table Page Table of Contents Safety Safety Instructions For Power ToolsLength AMP RatingAdditional Safety Instructions For Router Tables Always Feed Against the ROTA- Tion of the CutterIntroduction CommentaryCircuit Requirements GeneralElectricalMachine Features Machine features G0528 Sliding Router TableG0528 Inventory SET UPDescription QTY Hardware Recognition Chart BoltWorking Clearance Clean UpLighting And Outlets Assembly To install the rubber feetRubber Feet Components Needed QtyCross Supports To attach the table to the standTo assemble the stand StandTable is in the raised position To assemble the braces Fence Hold-Downs To attach the fence assemblyTo attach the hold-downs To attach the sliding table MiterTo attach the router to the table Switch To attach the switch to the stand legDust Port Hook-Up Before Routing OperationsJointing an edge Groove cutting Profile cuttingProper setup for profile cutting Top View Reference Info Machine Data Sheet G0528 Sliding Router Table Description Guard Warranty & Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WAPage Call Today For a Free Full Color Catalog

G0528 specifications

The Grizzly G0528 is a versatile and robust wood lathe designed for both professional woodworkers and hobbyists alike. Renowned for its exceptional build quality and user-friendly features, the G0528 is ideal for turning bowls, spindles, and a wide range of other wooden projects.

One of its standout features is the powerful 1-horsepower motor, which operates on 110 volts. This motor provides ample power for tasks ranging from detailed spindle work to larger bowl turning, ensuring consistent performance regardless of the project size. The variable speed control allows the user to adjust the spindle speed from 600 to 2400 RPM. This range is essential for accomplishing various turning techniques, allowing for greater control and precision when working with different woods.

The G0528 also offers a substantial distance between centers at 42 inches, giving woodworkers the ability to handle larger pieces without limitations. The 16-inch swing over the bed complements its capacity, allowing for the turning of sizable bowls and more intricate designs. The robust cast iron construction adds stability and reduces vibration during operation, providing a smoother finish on the final product.

Another noteworthy characteristic of the Grizzly G0528 is its user-friendly design. The lathe features a sliding tailstock, which enhances overall convenience when adjusting for different workpieces. Additionally, the sturdy and adjustable legs provide excellent support and can accommodate uneven surfaces. The lathe’s tool rest system is designed for easy repositioning, allowing for smooth transitions when changing the angle of attack during turning.

In terms of safety, the G0528 is equipped with a quick-access kill switch that allows users to power down the machine instantly in case of an emergency. This feature is essential for maintaining a secure working environment, particularly when working with high-speed machinery.

Moreover, the Grizzly G0528 is backed by Grizzly's reputation for quality, ensuring that users receive a reliable product with readily available parts and service. Overall, the Grizzly G0528 wood lathe combines power, versatility, and ease of use, making it an excellent investment for anyone serious about woodturning. Whether you are a seasoned professional or a budding enthusiast, the G0528 is designed to meet the diverse needs of the woodworking community.
Top Page Image Contents