Grizzly G0528 instruction manual Length, AMP Rating

Page 5

Safety Instructions For Power Tools

9.USE PROPER EXTENSION CORD. Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace exten- sion cords if they become damaged.

Minimum Gauge for Extension Cords

 

 

LENGTH

 

AMP RATING

25ft

 

50ft

100ft

0-6

16

 

16

16

7-10

16

 

16

14

11-12

16

 

16

14

13-16

14

 

12

12

17-20

12

 

12

10

21-30

10

 

10

No

 

 

 

 

 

10.WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective hair cov- ering to contain long hair.

11.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

12.SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and frees both hands to operate tool.

13.DO NOT OVER-REACH.Keep proper footing and balance at all times.

14.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubri-

cating and changing accessories.

15.USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recom- mended accessories. The use of improper accessories may cause risk of injury.

16.REDUCE THE RISK OF UNINTENTIONAL STARTING. On machines with magnetic contact starting switches there is a risk of starting if the machine is bumped or jarred. Always disconnect from power source before adjusting or servicing. Make sure switch is in OFF position before reconnect- ing.

17.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

18.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. DO NOT leave tool until it comes to a complete stop.

19.NEVER OPERATE A MACHINE WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Full mental alert- ness is required at all times when running a machine.

20.NEVER ALLOW UNSUPERVISED OR UNTRAINED PERSONNEL TO OPERATE THE MACHINE. Make sure any instruc- tions you give in regards to machine opera- tion are approved, correct, safe, and clearly understood.

21.IF AT ANY TIME YOU ARE EXPERIENC- ING DIFFICULTIES performing the intend- ed operation, stop using the machine! Then contact our service department or ask a

G0528 Sliding Router Table

-3-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Router Table Page Table of Contents Safety Instructions For Power Tools SafetyAMP Rating LengthAlways Feed Against the ROTA- Tion of the Cutter Additional Safety Instructions For Router TablesCommentary IntroductionGeneralElectrical Circuit RequirementsMachine features G0528 Sliding Router Table Machine FeaturesDescription QTY SET UPG0528 Inventory Bolt Hardware Recognition ChartLighting And Outlets Clean UpWorking Clearance To install the rubber feet AssemblyRubber Feet Components Needed QtyTo attach the table to the stand Cross SupportsTable is in the raised position To assemble the braces StandTo assemble the stand To attach the hold-downs To attach the fence assemblyFence Hold-Downs To attach the router to the table MiterTo attach the sliding table To attach the switch to the stand leg SwitchDust Port Hook-Up Jointing an edge OperationsBefore Routing Profile cutting Groove cuttingProper setup for profile cutting Top View Reference Info Machine Data Sheet G0528 Sliding Router Table Description Guard Warranty & Returns Warranty Card BOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCPage Call Today For a Free Full Color Catalog

G0528 specifications

The Grizzly G0528 is a versatile and robust wood lathe designed for both professional woodworkers and hobbyists alike. Renowned for its exceptional build quality and user-friendly features, the G0528 is ideal for turning bowls, spindles, and a wide range of other wooden projects.

One of its standout features is the powerful 1-horsepower motor, which operates on 110 volts. This motor provides ample power for tasks ranging from detailed spindle work to larger bowl turning, ensuring consistent performance regardless of the project size. The variable speed control allows the user to adjust the spindle speed from 600 to 2400 RPM. This range is essential for accomplishing various turning techniques, allowing for greater control and precision when working with different woods.

The G0528 also offers a substantial distance between centers at 42 inches, giving woodworkers the ability to handle larger pieces without limitations. The 16-inch swing over the bed complements its capacity, allowing for the turning of sizable bowls and more intricate designs. The robust cast iron construction adds stability and reduces vibration during operation, providing a smoother finish on the final product.

Another noteworthy characteristic of the Grizzly G0528 is its user-friendly design. The lathe features a sliding tailstock, which enhances overall convenience when adjusting for different workpieces. Additionally, the sturdy and adjustable legs provide excellent support and can accommodate uneven surfaces. The lathe’s tool rest system is designed for easy repositioning, allowing for smooth transitions when changing the angle of attack during turning.

In terms of safety, the G0528 is equipped with a quick-access kill switch that allows users to power down the machine instantly in case of an emergency. This feature is essential for maintaining a secure working environment, particularly when working with high-speed machinery.

Moreover, the Grizzly G0528 is backed by Grizzly's reputation for quality, ensuring that users receive a reliable product with readily available parts and service. Overall, the Grizzly G0528 wood lathe combines power, versatility, and ease of use, making it an excellent investment for anyone serious about woodturning. Whether you are a seasoned professional or a budding enthusiast, the G0528 is designed to meet the diverse needs of the woodworking community.
Top Page Image Contents