Compex Systems NetPassage WP18 manual Chapter Let’s Get Going Hardware Setup

Page 6

Chapter 2 Let’s Get Going - Hardware Setup

Insert one end of the RJ45 Ethernet cable to any of the LAN ports (1,2 or 3) on your Compex WP18, and the other end of the cable to your PC’s Ethernet network adapter.

Attach the power adapter to the main electrical supply, and connect the power plug into the socket of the Compex WP18.

Image 6

Contents Quick Install Guide Packaging Content Unit Introduction Packaging Content Let’s Get Going-Hardware Setup Option One Using power adapter to supply power to the unitChapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Option Two Using Compex PoE to supply power to the unit Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Through the Compex Utility uConfig Access to Web-based InterfaceAccess to the Web interface with uConfig Through your web browserChapter Access to Web-based Interface Chapter Access to Web-based Interface Access to the Web interface manually Chapter Access to Web-based Interface Name Description Power LEDPanel Views and Descriptions Front View of NetPassage WP18 in the standing positionWlan 1,2 Diag LEDSide View of NetPassage WP18 in the standing position Chapter Panel Views and Descriptions Technical Specifications Advanced Features Power over EthernetOutput Power Ieee 802.11a Profile Backup & RestoreOperating Temp Storage Temp Operating Humidity Further Information ReferencesComputer and receiver Ices 003 Statement Warranty Registration Card Manual Number 0508-V1.1C Version September