Compex Systems NetPassage WP18 manual Chapter Let’s Get Going Hardware Setup

Page 11

Chapter 2

Let’s Get Going - Hardware Setup

Option Three: Using IEEE 802.3af PoE Injector to supply power to the unit

Compex WP18 can be powered using the IEEE802.3af PoE Injector. This accessory supplies operational power to the wireless AP via the Ethernet cable connection. The installation process is described below.

Follow the same procedure as described in the Option One. And also refer to Appendix C ( in user’s manual) for configuring the jumper JP01 before proceeding to Step 2.

Use an RJ45 Ethernet cable to connect one end of the cable to the Ethernet socket of the Injector and the other end to the Port 4 (PoE Port) of Compex WP18.

Maximum length of the RJ45 Category 5 cable is 100 metres.

9

Image 11

Contents Quick Install Guide Unit Packaging ContentIntroduction Packaging Content Option One Using power adapter to supply power to the unit Let’s Get Going-Hardware SetupChapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Option Two Using Compex PoE to supply power to the unit Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Through your web browser Access to Web-based InterfaceAccess to the Web interface with uConfig Through the Compex Utility uConfigChapter Access to Web-based Interface Chapter Access to Web-based Interface Access to the Web interface manually Chapter Access to Web-based Interface Front View of NetPassage WP18 in the standing position Power LEDPanel Views and Descriptions Name DescriptionDiag LED Wlan 1,2Side View of NetPassage WP18 in the standing position Chapter Panel Views and Descriptions Technical Specifications Profile Backup & Restore Power over EthernetOutput Power Ieee 802.11a Advanced FeaturesFurther Information References Operating Temp Storage Temp Operating HumidityComputer and receiver Ices 003 Statement Warranty Registration Card Manual Number 0508-V1.1C Version September