Compex Systems NetPassage WP18 manual Chapter Let’s Get Going Hardware Setup

Page 7

Chapter 2 Let’s Get Going - Hardware Setup

Power ON your PC. Notice that the Power and Port 1 or 2 (depending on which port you have connected the RJ45 Ethernet cable to) LEDs have lighted up. This indicates that the connection has been established successfully between your Compex WP18 and your PC.

Image 7

Contents Quick Install Guide Unit Packaging ContentIntroduction Packaging Content Option One Using power adapter to supply power to the unit Let’s Get Going-Hardware SetupChapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Option Two Using Compex PoE to supply power to the unit Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Through your web browser Access to Web-based InterfaceAccess to the Web interface with uConfig Through the Compex Utility uConfigChapter Access to Web-based Interface Chapter Access to Web-based Interface Access to the Web interface manually Chapter Access to Web-based Interface Front View of NetPassage WP18 in the standing position Power LEDPanel Views and Descriptions Name DescriptionDiag LED Wlan 1,2Side View of NetPassage WP18 in the standing position Chapter Panel Views and Descriptions Technical Specifications Profile Backup & Restore Power over EthernetOutput Power Ieee 802.11a Advanced FeaturesFurther Information References Operating Temp Storage Temp Operating HumidityComputer and receiver Ices 003 Statement Warranty Registration Card Manual Number 0508-V1.1C Version September