Chapter 2 | Let’s Get Going - Hardware Setup |
Option Two: Using Compex PoE to supply power to the unit
Compex
Users who have already purchased the Compex PoE and who wish to use it to supply power to the Compex WP18 may follow the installation procedures as shown below:
Follow the same procedure as described in the Option One. And also refer to Appendix C (in user’s manual) for configuring the jumper JP01 before proceeding to Step 2.
Use an RJ45 Ethernet cable to connect one end of the cable to the Ethernet socket of the Injector and the other end to the Port 4 (PoE Port) of Compex WP18.
For Compex PoE, the recommended length of the RJ45 Category 5 cable is up to 50 metres.
6