Compex Systems NetPassage WP18 manual Chapter Let’s Get Going Hardware Setup

Page 9

Chapter 2

Let’s Get Going - Hardware Setup

Next, connect the RJ45 Ethernet cable attached to the Compex PoE Injector to your PC’s Ethernet network adapter.

Once you have finished configuring your WP18, you can connect the PoE Injector’s RJ45 Ethernet cable to your network device, such as to a switch or hub.

PC

Connect the power adapter supplied in the Compex PoE kit to the main electrical supply and the power plug into the socket of the injector.

Note:

The voltage and current supplied to the Compex WP18 power adapter and the Compex PoE kit power adapter are different. Do not interchange the power adapters.

PC

7

Image 9

Contents Quick Install Guide Unit Packaging ContentIntroduction Packaging Content Option One Using power adapter to supply power to the unit Let’s Get Going-Hardware SetupChapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Option Two Using Compex PoE to supply power to the unit Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Chapter Let’s Get Going Hardware Setup Access to the Web interface with uConfig Access to Web-based InterfaceThrough the Compex Utility uConfig Through your web browserChapter Access to Web-based Interface Chapter Access to Web-based Interface Access to the Web interface manually Chapter Access to Web-based Interface Panel Views and Descriptions Power LEDName Description Front View of NetPassage WP18 in the standing positionDiag LED Wlan 1,2Side View of NetPassage WP18 in the standing position Chapter Panel Views and Descriptions Technical Specifications Output Power Ieee 802.11a Power over EthernetAdvanced Features Profile Backup & RestoreFurther Information References Operating Temp Storage Temp Operating HumidityComputer and receiver Ices 003 Statement Warranty Registration Card Manual Number 0508-V1.1C Version September