Page 52
D1.4 show interface atm 1/0
XSR1805-ADSL #show interface atm 1/0
********** ATM Interface Stats **********
ATM 1/0 is Admin Up / Oper Up
Description: "ADSL-connection"
The name of this device is adsl.
Administrative State is ENABLED
Operational State is UP.
The upstream data rate is 192 kbit/sec.
The downstream data rate is 928 kbit/sec.
General info: | |
ifindex | 0 |
ifType | 94 |
ifAdminStatus | 1 |
ifOperStatus | 1 |
ifLastChange | 00:16:09 |
ifInOctets | 539868 |
ifInUcastPkts | 8205 |
ifInNUcastPkts | 0 |
ifInDiscards | 2 |
ifInErrors | 0 |
ifInUnknownProtos | 0 |
ifOutOctets | 5184 |
ifOutUcastPkts | 50 |
ifOutNUcastPkts | 0 |
ifOutDiscards | 0 |
ifOutErrors | 0 |
ifOutQLen | 50 |
AAL5 in | 42 |
AAL5 out | 50 |
HEC errors | 0 |
AIS | F4 | 0 |
RDI | F4 | 0 |
CC | F4 | 0 |
LPBK | F4 | | 0 | | | | |
VPI/VCI | AAL5 | AIS/F5 | RDI/F5 | CC/F5 | LPBK/F5 | AIS/RDI |
1/32 | | 00000042 | 00000000 | 00000000 | 00000000 | 00000000 | |
XSR1805-ADSL#
Configuration Guide | Page 52 of 55 |
Contents
Configuration Guide
Table of Contents
Helpful commands for using the XSR platform
Appendix
IP-Address and Secondary Addresses configuration
IP-Static-routing IP-Loopback Interface
IP-OSPF-routing
IP-RIPv1,v2-routing
Ip local pool 10th 10.10.10.0
Sntp Simple Network Time Protocol
Duplex full
System login banner
Duplex half
Configuration Guide
Access control list moving online editing
XSR-1805config#access-list 110 move 1
Router-2-Backup
Virtual Router Redundancy Protocol RFC
Router-1-Master
Hostname XSR-18051
Vrrp monitor interface function, interface tracking
Vrrp 1 priority Vrrp 1 master-respond-ping no shutdown
Access-list 10 permit 10.10.10.0
NAT static bindings
NAT dynamic with PAT Port Address Translation
Ip address 10.10.10.1 255.255.255.0 no shutdown
Dialer Interface
Dialer Backup interface function
Controller e1 0/2/0 clock source internal no shutdown
PAP for authentication PPP
Username remote privilege 0 password is not displayed
Username remote privilege 0 cleartext iamRemote
Chap for authentication PPP
Interface Dialer0 dialer pool
VPN via Dialer Interface rtr1
XSR-1805-1config#aaa user XSR-1805-1config-aaa#password XSR
Dialer-list 1 protocol ip list
VPN via Dialer Interface rtr2
Ppp pap sent-username central password xsr ppp multilink
Dialer Int. PRI to BRI with D-channel-callbackcentral-site
Ppp pap sent-username remote1 password xsr1 ppp multilink
Dialer Int. PRI to BRI with D-channel-callbackremote1-site
Ppp pap sent-username remote2 password xsr2 ppp multilink
Dialer Int. PRI to BRI with D-channel-callbackremote2-site
Isdn config for BRIx/x Isdn switch type changing
Dialer caller 112233 callback dialer remote-name XSR-Remote
Isdn callback
Dialer-group
Isdn multilink / Isnd channel bundling
PPPoE on Adsl interface with chap authentication
AAA Authentication Authorization Accounting Radius
Ip ssh server disable Ip telnet server disable
SSH / Telnet
Syslog function, Server local-buffer
Logging Snmp Medium
Snmp configuration /contact/location/parameter
Snmp v1/v2/v3
XSR-18051config#aaa user XSR-18051config-aaa#password XSR
0r1 VPN Ipsec site-to-site tunnel via pre-shared key
Router-1
Ip route 80.80.80.0 255.255.255.0
XSR-18052config#aaa user XSR-18052config-aaa#password XSR
0r2 VPN Ipsec site-to-site tunnel via pre-shared key
Router-2
Ip route 10.10.10.0 255.255.255.0
VPN Ipsec site-to-site tunnel certification PKI
XSR-18051config#crypto ca identity Enterasys-Networks-CA
Password Re-enter password
XSR-18051config#crypto ca crl request Enterasys-Networks-CA
Request certificate from CA y/n ? y
Certification control / certificates / Crls / CA identity
ENTITY-ACTIVE
VPN Pptp User termination
Pptp encrypt mppe auto
XSR-18051config#aaa user XSR-18051config-aaa#password XSR
XSR-18052config#aaa user XSR-18052config-aaa#password XSR
5r1 GRE native site-to-site tunnel
Version 6.0.0.0, Built Sep 14 2003
5r2 GRE native site-to-site tunnel
Diffserv Dscp field addressing
Description InteralnetworkPrivate ip address 10.10.10.1
Firewall configuration
Description internalloopbackPrivate ip address 13.13.13.1
Ip address 20.20.20.1
Vlan configuration 802.1q tagged routing
Ip address 30.30.30.1
A1.2 ping & traceroute
Version 2.02, Built Feb 24 2003
Version 4.0.0.0, Built Mar 26 2003
XSR-1805 uptime is 0 days, 2 hours, 23 minutes
Current operational duplex mode is negotiated to full
A1.4 telnet to other routers
Physical link is currently up
Current operational speed is negotiated to 100 Mb/s
A1.5 flash/ cflash/ dir, rename, copy commands
A1.6 verify the flash file checksum
B1.0 show ip route
B1.1 show ip arp
C1.0 show tunnels
C1.1 show crypto isakmp sa
C1.2 show crypto ipsec sa
C1.3 show crypto map
C1.4 show tunnels / GRE via Ipsec
C1.5 show interface vpn / GRE via Ipsec
C1.6 show crypto ipsec sa / GRE via Ipsec
C1.7 show ip route / GRE via Ipsec
D1.2 show controllers atm 1/0
D1.1 show ip interface atm 1/0.1
MTU is 1492 bytes
D1.3 show controllers atm 1/0.1
VPI/VCI 1/32
ATM 1/0 is Admin Up / Oper Up
Administrative State is Enabled Operational State is UP
D1.4 show interface atm 1/0
IfLastChange 001609
ATM 1/0.1 is Admin Up / Oper Up
D1.5 show interface atm 1/0.1
State Opened
PPPoE is Oper Up
ATM 1/0.1 PPP is Admin Up / Oper Up
Chap authentication success with
D1.6 show ppp interface atm 1/0.1
Current State
Getting Help