Enterasys Networks XSR-Series manual A1.4 telnet to other routers, Physical link is currently up

Page 45

A1.3 show interface - IP address, speed, duplex, statistics, errors

XSR-1805#show interface

FastEthernet1 is Admin Up Description: LAN-Interface1

Internet address is 10.10.10.1, subnet mask is 255.255.255.0

The name of this device is Eth1.

The physical link is currently up.

The device is in polling mode, and is active.

The last driver error is '(null)'.

The duplex mode is set to auto-negotiated.

The current operational duplex mode is negotiated to full.

The speed is set to auto-negotiated.

The current operational speed is negotiated to 100 Mb/s.

The primary MAC address is (in hex) 00:01:f4:a3:5d:92.

The MTU is 1500.

The bandwidth is 100 Mb/s.

Other Interface Statistics:

ifindex	0
ifType	6
ifAdminStatus	1
ifOperStatus	1
ifLastChange	01:10:36
ifInOctets	155686754
ifInUcastPkts	751980
ifInNUcastPkts	5288
ifInDiscards	0
ifInErrors	0
ifInUnknownProtos	0
ifOutOctets	147786961
ifOutUcastPkts	734848
ifOutNUcastPkts	1358
ifOutDiscards	0
ifOutErrors	0
ifOutQLen	256

XSR-1805#

A1.4 telnet to other routers

XSR-1805#telnet ?

A.B.C.D IP address of telnet server

XSR-1805#telnet 10.10.10.99

Trying 10.10.10.99 ...

XSR-1805#

Configuration Guide

Page 45 of 55

Image 45

Contents Configuration Guide Table of Contents Appendix Helpful commands for using the XSR platformIP-Static-routing IP-Loopback Interface IP-Address and Secondary Addresses configurationIP-OSPF-routing IP-RIPv1,v2-routing Ip local pool 10th 10.10.10.0 Sntp Simple Network Time Protocol System login banner Duplex fullDuplex half Configuration Guide XSR-1805config#access-list 110 move 1 Access control list moving online editingVirtual Router Redundancy Protocol RFC Router-2-BackupRouter-1-Master Hostname XSR-18051Vrrp 1 priority Vrrp 1 master-respond-ping no shutdown Vrrp monitor interface function, interface trackingNAT static bindings Access-list 10 permit 10.10.10.0NAT dynamic with PAT Port Address Translation Ip address 10.10.10.1 255.255.255.0 no shutdownDialer Interface Controller e1 0/2/0 clock source internal no shutdown Dialer Backup interface functionUsername remote privilege 0 password is not displayed PAP for authentication PPPChap for authentication PPP Username remote privilege 0 cleartext iamRemoteInterface Dialer0 dialer pool XSR-1805-1config#aaa user XSR-1805-1config-aaa#password XSR VPN via Dialer Interface rtr1Dialer-list 1 protocol ip list VPN via Dialer Interface rtr2 Dialer Int. PRI to BRI with D-channel-callbackcentral-site Ppp pap sent-username central password xsr ppp multilinkDialer Int. PRI to BRI with D-channel-callbackremote1-site Ppp pap sent-username remote1 password xsr1 ppp multilinkDialer Int. PRI to BRI with D-channel-callbackremote2-site Ppp pap sent-username remote2 password xsr2 ppp multilinkIsdn config for BRIx/x Isdn switch type changing Isdn callback Dialer caller 112233 callback dialer remote-name XSR-RemoteDialer-group Isdn multilink / Isnd channel bundling PPPoE on Adsl interface with chap authentication AAA Authentication Authorization Accounting Radius SSH / Telnet Ip ssh server disable Ip telnet server disableSyslog function, Server local-buffer Logging Snmp MediumSnmp v1/v2/v3 Snmp configuration /contact/location/parameter0r1 VPN Ipsec site-to-site tunnel via pre-shared key XSR-18051config#aaa user XSR-18051config-aaa#password XSRRouter-1 Ip route 80.80.80.0 255.255.255.00r2 VPN Ipsec site-to-site tunnel via pre-shared key XSR-18052config#aaa user XSR-18052config-aaa#password XSRRouter-2 Ip route 10.10.10.0 255.255.255.0VPN Ipsec site-to-site tunnel certification PKI Password Re-enter password XSR-18051config#crypto ca identity Enterasys-Networks-CAXSR-18051config#crypto ca crl request Enterasys-Networks-CA Request certificate from CA y/n ? yENTITY-ACTIVE Certification control / certificates / Crls / CA identityPptp encrypt mppe auto VPN Pptp User terminationXSR-18051config#aaa user XSR-18051config-aaa#password XSR XSR-18052config#aaa user XSR-18052config-aaa#password XSR Version 6.0.0.0, Built Sep 14 2003 5r1 GRE native site-to-site tunnel5r2 GRE native site-to-site tunnel Diffserv Dscp field addressing Firewall configuration Description InteralnetworkPrivate ip address 10.10.10.1Description internalloopbackPrivate ip address 13.13.13.1 Vlan configuration 802.1q tagged routing Ip address 20.20.20.1Ip address 30.30.30.1 Version 2.02, Built Feb 24 2003 A1.2 ping & tracerouteVersion 4.0.0.0, Built Mar 26 2003 XSR-1805 uptime is 0 days, 2 hours, 23 minutesA1.4 telnet to other routers Current operational duplex mode is negotiated to fullPhysical link is currently up Current operational speed is negotiated to 100 Mb/sA1.6 verify the flash file checksum A1.5 flash/ cflash/ dir, rename, copy commandsB1.1 show ip arp B1.0 show ip routeC1.1 show crypto isakmp sa C1.0 show tunnelsC1.2 show crypto ipsec sa C1.3 show crypto mapC1.5 show interface vpn / GRE via Ipsec C1.4 show tunnels / GRE via IpsecC1.6 show crypto ipsec sa / GRE via Ipsec C1.7 show ip route / GRE via IpsecD1.1 show ip interface atm 1/0.1 D1.2 show controllers atm 1/0MTU is 1492 bytes VPI/VCI 1/32 D1.3 show controllers atm 1/0.1Administrative State is Enabled Operational State is UP ATM 1/0 is Admin Up / Oper UpD1.4 show interface atm 1/0 IfLastChange 001609D1.5 show interface atm 1/0.1 ATM 1/0.1 is Admin Up / Oper UpState Opened PPPoE is Oper UpChap authentication success with ATM 1/0.1 PPP is Admin Up / Oper UpD1.6 show ppp interface atm 1/0.1 Current StateGetting Help