Enterasys Networks XSR-Series D1.5 show interface atm 1/0.1, ATM 1/0.1 is Admin Up / Oper Up

Page 53

D1.5 show interface atm 1/0.1

XSR1805-ADSL #show interface atm 1/0.1

********** ATM Sub-Interface Stats **********

ATM 1/0.1 is Admin Up / Oper Up

Internet address is 212.184.161.76, subnet mask is 255.255.255.255

LCP

State: OPENED

IPCP

State: OPENED

PPPoE is Oper Up

The logical

link is currently Up

The Name of

the Access Concentrator is ERX1400

The Session

Id is 0x0054

The MAC Address of the Access Concentrator is 0x00:90:1a:01:03:84 The MTU is 1492

The name of this device is adsl-0.

Administrative State is ENABLED

Operational State is UP

Circuit monitoring disabled.

VPI is 1.

VCI is 32.

ifindex

0

ifType

94

ifAdminStatus

1

ifOperStatus

1

ifLastChange

00:16:09

ifInOctets

3180

ifInUcastPkts

42

ifInNUcastPkts

0

ifInDiscards

0

ifInErrors

0

ifInUnknownProtos

0

ifOutOctets

5184

ifOutUcastPkts

50

ifOutNUcastPkts

0

ifOutDiscards

0

ifOutErrors

0

ifOutQLen

50

XSR1805-ADSL#

Configuration Guide

Page 53 of 55

Image 53
Contents Configuration Guide Table of Contents Appendix Helpful commands for using the XSR platformIP-Static-routing IP-Loopback Interface IP-Address and Secondary Addresses configurationIP-OSPF-routing IP-RIPv1,v2-routing Ip local pool 10th 10.10.10.0 Sntp Simple Network Time Protocol Duplex half System login bannerDuplex full Configuration Guide XSR-1805config#access-list 110 move 1 Access control list moving online editingVirtual Router Redundancy Protocol RFC Router-2-BackupRouter-1-Master Hostname XSR-18051Vrrp 1 priority Vrrp 1 master-respond-ping no shutdown Vrrp monitor interface function, interface trackingNAT static bindings Access-list 10 permit 10.10.10.0NAT dynamic with PAT Port Address Translation Ip address 10.10.10.1 255.255.255.0 no shutdownDialer Interface Controller e1 0/2/0 clock source internal no shutdown Dialer Backup interface functionUsername remote privilege 0 password is not displayed PAP for authentication PPPInterface Dialer0 dialer pool Chap for authentication PPPUsername remote privilege 0 cleartext iamRemote Dialer-list 1 protocol ip list XSR-1805-1config#aaa user XSR-1805-1config-aaa#password XSRVPN via Dialer Interface rtr1 VPN via Dialer Interface rtr2 Dialer Int. PRI to BRI with D-channel-callbackcentral-site Ppp pap sent-username central password xsr ppp multilinkDialer Int. PRI to BRI with D-channel-callbackremote1-site Ppp pap sent-username remote1 password xsr1 ppp multilinkDialer Int. PRI to BRI with D-channel-callbackremote2-site Ppp pap sent-username remote2 password xsr2 ppp multilinkIsdn config for BRIx/x Isdn switch type changing Dialer-group Isdn callbackDialer caller 112233 callback dialer remote-name XSR-Remote Isdn multilink / Isnd channel bundling PPPoE on Adsl interface with chap authentication AAA Authentication Authorization Accounting Radius SSH / Telnet Ip ssh server disable Ip telnet server disableSyslog function, Server local-buffer Logging Snmp MediumSnmp v1/v2/v3 Snmp configuration /contact/location/parameter0r1 VPN Ipsec site-to-site tunnel via pre-shared key XSR-18051config#aaa user XSR-18051config-aaa#password XSRRouter-1 Ip route 80.80.80.0 255.255.255.00r2 VPN Ipsec site-to-site tunnel via pre-shared key XSR-18052config#aaa user XSR-18052config-aaa#password XSRRouter-2 Ip route 10.10.10.0 255.255.255.0VPN Ipsec site-to-site tunnel certification PKI Password Re-enter password XSR-18051config#crypto ca identity Enterasys-Networks-CAXSR-18051config#crypto ca crl request Enterasys-Networks-CA Request certificate from CA y/n ? yENTITY-ACTIVE Certification control / certificates / Crls / CA identityPptp encrypt mppe auto VPN Pptp User terminationXSR-18051config#aaa user XSR-18051config-aaa#password XSR XSR-18052config#aaa user XSR-18052config-aaa#password XSR Version 6.0.0.0, Built Sep 14 2003 5r1 GRE native site-to-site tunnel5r2 GRE native site-to-site tunnel Diffserv Dscp field addressing Description internalloopbackPrivate ip address 13.13.13.1 Firewall configurationDescription InteralnetworkPrivate ip address 10.10.10.1 Ip address 30.30.30.1 Vlan configuration 802.1q tagged routingIp address 20.20.20.1 Version 2.02, Built Feb 24 2003 A1.2 ping & tracerouteVersion 4.0.0.0, Built Mar 26 2003 XSR-1805 uptime is 0 days, 2 hours, 23 minutesA1.4 telnet to other routers Current operational duplex mode is negotiated to fullPhysical link is currently up Current operational speed is negotiated to 100 Mb/sA1.6 verify the flash file checksum A1.5 flash/ cflash/ dir, rename, copy commandsB1.1 show ip arp B1.0 show ip routeC1.1 show crypto isakmp sa C1.0 show tunnelsC1.2 show crypto ipsec sa C1.3 show crypto mapC1.5 show interface vpn / GRE via Ipsec C1.4 show tunnels / GRE via IpsecC1.6 show crypto ipsec sa / GRE via Ipsec C1.7 show ip route / GRE via IpsecMTU is 1492 bytes D1.1 show ip interface atm 1/0.1D1.2 show controllers atm 1/0 VPI/VCI 1/32 D1.3 show controllers atm 1/0.1Administrative State is Enabled Operational State is UP ATM 1/0 is Admin Up / Oper UpD1.4 show interface atm 1/0 IfLastChange 001609D1.5 show interface atm 1/0.1 ATM 1/0.1 is Admin Up / Oper UpState Opened PPPoE is Oper UpChap authentication success with ATM 1/0.1 PPP is Admin Up / Oper UpD1.6 show ppp interface atm 1/0.1 Current StateGetting Help