Festool 1400 EQ Working with the router, Freehand routing, Routing with the parallel guide

Page 12

12

Working with the router

Always secure the workpiece in such a manner that it cannot move while being sawed.

The machine must always be held with both hands by the designated handles.

Always switch the router on first before bringing the tool into contact with the workpiece!

Always advance the router in the same direction as the cutting direction of the cutter (counter-routing, see Fig. 7)!

Freehand routing

Freehand routing is the method normally used for lettering or shapes, and for routing edges using cutters with a guide pin or ring.

Routing with the parallel guide

The parallel guide supplied can be used for routing parallel to the edge of the workpiece.

- Secure both guide rods (8.2) with the two rotary knobs (8.4) on the side stop.

- Insert the guide rods into the grooves on the router base to the required distance and secure them by turning the rotary knob (8.5).

- Fine adjustment: Unscrew the rotary knob (8.6) to make fine adjustments with the adjusting wheel (8.8). The scale ring (8.7) has a 0.1 mm scale for this purpose. If the adjusting wheel is held secure, the scale ring can be turned separately and set to „Zero“. The millimetre scale (8.1) on the main casing is useful when making larger adjustments. Tighten the rotary knob (8.6) again on completion of any fine adjustments.

- Adjust both guidance jaws (8.3, 8.9) so that they are approx. 5 mm from the router. To do this, undo screws (8.10) and tighten again after completing the adjustments.

- As shown in Fig. 8, slide the extractor hood (8.12) from behind until it latches into place on the side stop. You can connect an extractor hose with a diameter of 27 mm or 36 mm to the extractor connector (8.11).

Routing with the FS guide system

The guide system, available as an accessory, facilitates routing straight grooves.

- Fasten the guide stop (9.1) to the platen with the guide rails of the parallel guide.

- Fasten the guide rail (9.3) with FSZ screw clamps (9.4) to the workpiece. Make sure that the safety distance X of 5 mm between the front edge of the guide rail and cutter or groove is observed.

- Place the guide stop onto the guide rail as shown in Fig. 9. To ensure a backlash-free guidance of the router stop you can adjust two guide cheeks with a screwdriver through the side openings (9.2).

- Screw the height-adjustable support (9.6) of the router table’s threaded bore in such a way that the underside of the router table is parallel to the surface of the workpiece.

When working with marking-up lines, the marks on the platen (9.5) and the scale on the support (9.6) show the centre axis of the cutter.

The distance of the router to the guide rail can be set finely using the fine adjustment (10.5, Accessories).

- Fit the fine adjustment (10.5) between the router and guide stop (10.4) on the guide bars.

- Insert the adjusting wheel (10.2) for the fine adjustment in the recesses of the fine adjustment and guide stop (see Fig. 10), and screw the thread of the adjusting wheel approximately half way into the nut of the fine adjustment.

- To set, close the rotary knob (10.1) of the fine adjustment and open the rotary knob (10.3) of the guide stop.

- After making the setting, close the rotary knob (10.2) of the guide stop.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 1400 EQ General Safety Rules Work area safetyElectrical safety Personal safetyRègles DE Sécurité Générales Normas Generales DE SeguridadConservez CES Instructions Conserve Estas InstruccionesService Specific Safety Rule for RoutersTool use and care Utilisation et entretien des outils Uso y cuidado de la herramientaEntretien et réparation MantenimientoTechnical data SymbolsUse for intended purpose Electrical connectionSymbole Caractéristiques techniquesUtilisation conforme Raccordement électriqueSwitching the machine on and off Tool settingsElectronics Smooth start-upMise en marche et arrêt de la machine Conexión y desconexión de la máquinaElectronique Démarrage en douceurAdjusting the milling depth Setting the zero pointSetting the milling depth Milling cuttersOutils de fraisage Insertion de l’outilRetrait de l’outil Changement de pince de serrageWorking with the router Freehand routingRouting with the parallel guide Routing with the FS guide systemTravailler avec la défonceuse Usinage à la voléeFraiser avec la butée latérale Fraiser avec le système de guidage FSServicing and maintenance Copy cuttingCopying ring Copying deviceMaintenance et entretien Copier un fraisageBague de copiage Fresar copiandoAccessories, tools Warranty Conditions of 1+2 WarrantyFestool Limited Warranty Accessoires, outils Accesorios, herramientasGarantie Conditions de la garantie 1+2 ans Garantie limitée de FestoolPage

1400 EQ specifications

The Festool 1400 EQ is a premium plunge router designed for a wide range of woodworking tasks, blending precision, power, and user-friendly features. This machine stands out among its peers thanks to its advanced engineering and innovative technologies, making it an essential tool for both professionals and woodworking enthusiasts.

One of the primary features of the Festool 1400 EQ is its robust motor, delivering 1400 watts of power. This powerful motor enables the router to handle a variety of materials, including hardwoods, softwoods, and composite materials. The variable speed control allows users to adjust the RPM from 10,000 to 24,000, providing optimal performance for different applications. Whether you are making intricate cuts or performing edge shaping, the speed control ensures precision and efficiency.

The design of the 1400 EQ is user-oriented, featuring an ergonomic handle that provides excellent grip and comfort during operation. The plunge depth can be easily adjusted with a single dial, allowing for precise routing depths without any tools. This feature is particularly beneficial for users who frequently switch between tasks, as it saves time and enhances productivity.

Festool's unique FastFix system further elevates the versatility of the 1400 EQ. This technology enables quick and easy bit changes without the need for additional tools, ensuring that users can swiftly adapt to various routing tasks. The large base and the option to attach a guide rail ensure stability and accuracy, making it easier to achieve clean, smooth cuts.

Another standout characteristic is the integrated dust extraction system. With the ability to connect to a Festool dust extractor, the 1400 EQ effectively minimizes dust and debris in the workspace, creating a cleaner and safer environment. This feature not only enhances visibility during work but also helps in maintaining a healthier atmosphere.

Durability and reliability are core attributes that Festool products are known for, and the 1400 EQ is no exception. Constructed with high-quality materials, this router is designed to withstand the rigors of heavy use, ensuring it remains a reliable tool for years to come.

In summary, the Festool 1400 EQ combines power, precision, and user-friendly features, making it a top choice for anyone serious about woodworking. Its advanced technologies and thoughtful design cater to a range of routing tasks, ensuring that users can achieve their desired results with ease and efficiency.
Top Page Image Contents