Unpacking
Open shipping container and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the Drum Sander is assembled and running properly.
Compare the contents of your container with the following parts list to make sure all parts are intact. Missing parts, if any, should be reported to your distributor. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.
Contents of the Shipping Container
Refer to Figure 2
Box 1:
1 | Drum Sander |
|
1 | Handwheel |
|
1 | TUF Tool |
|
1 | Abrasive Strip (already installed on drum) | Figure 2 |
1Owner’s Manual (not shown)
1Warranty Card (not shown)
1Hardware Bag containing:
4 Socket Head Cap Screws,
4 Lock Washers, 5/16”
4 Flat Washers, 5/16”
4Hex Cap Screws,
4Flat Washers, 3/8”
3Hex Wrenches, 1/8”, 4mm and 6mm (not shown)
Box 2:
1 Conveyor Assembly
Read and understand the entire contents of this manual before attempting
8