Grizzly T26417/T26418 owner manual T26418 Inventory Box 2 Figure Qty

Inventory

The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them.

If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are pre-installed at the factory.

T26417 Inventory (Figure 3)		Qty
A.	Oscillating Sander	1
B.	Wrench Open-Ends 14-17mm	2

C.Sanding Drums w/ Sanding Sleeves

–3⁄4" x 31⁄2"	1
–1" x 41⁄2"	1
–2" x 51⁄2"	1

D.Table Inserts

–11⁄4" x 11⁄4"	1
–21⁄4" x 21⁄4"	1
–11⁄4" x 21⁄8"	1
–21⁄4" x 35⁄8"	1

T26418 Inventory Box 2 (Figure 4)		Qty
A.	Oscillating Sander	1
B.	Wrench Open-Ends 19-22mm	2

C.Sanding Drums w/ Sanding Sleeves

	–3⁄4" x 41⁄2"	1
	–2" x 9"	1
	–3" x 9"	1
D.	Table Inserts
	–11⁄4" x 11⁄4"	1
	–23⁄8" x 23⁄8"	1
	–31⁄2" x 31⁄2"	1
	–11⁄4" x 21⁄8"	1
	–23⁄8" x 35⁄8"	1
	–31⁄2" x 47⁄16"	1
E.	Stand (Already Assembled in Picture)	1

BA

C

D

E

Figure 4. T26418 Inventory.

B

D

A

C

Figure 3. T26417 Inventory.

-14- Model T26417/T26418 (Mfd. Since 11/13)