Sander Safety Warnings, Not Recommended

these are connected and properly used. Use of dust collection can reduce dust-related hazards.

Power tool use and care

17.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

18.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

19.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

20.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

21.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

22.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

23.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended

could result in a hazardous situation.

Service

24.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

25.Follow instruction for lubricating and changing accessories.

26.Keep handles dry, clean and free from oil and grease.

USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

		Table 1: Minimum gage for cord
		Volts		Total length of cord in feet
Ampere Rating		120V	25 ft.	50 ft.	100 ft.	150 ft.
		220V - 240V	50 ft.	100 ft.	200 ft.	300 ft.
More Than	Not More Than			AWG
0		6	18	16	16	14
6		10	18	16	14	12
10		12	16	16	14	12
12		16	14	12	Not Recommended

000300

GEB021-4

SANDER SAFETY WARNINGS

1.Always use safety glasses or goggles. Ordinary eye or sun glasses are NOT safety glasses.

2.Hold the tool firmly.

3.Do not leave the tool running. Operate the tool only when hand-held.

4.This tool has not been waterproofed, so do not use water on the workpiece surface.

5.Ventilate your work area adequately when you perform sanding operations.

6.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.

7.Use of this tool to sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection.

BO5030, BO5031 specifications

The Makita BO5030K and BO5030 are top-tier finishing sanders designed to provide exceptional performance and efficiency for both professional tradespeople and DIY enthusiasts. Makita, a brand renowned for its commitment to quality and innovation, integrates advanced features and technologies in these models, making them stand out in the competitive power tool market.

One of the main features of both the BO5030K and the BO5030 is their powerful 3.0-AMP motor. This robust motor delivers a no-load speed of up to 12,000 OPM (orbits per minute), ensuring rapid material removal and a smooth finish on wood, metal, or plastic surfaces. The combination of power and speed allows users to tackle a variety of sanding tasks with ease, from heavy stock removal to fine finishing.

The design of the BO5030K and BO5030 includes a balanced and ergonomic structure, which helps reduce user fatigue during extended periods of use. The sander’s rubberized grip ensures comfort and control, enhancing precision while sanding. The low profile design of these sanders makes it easy to reach tight corners and edges, ensuring a thorough finish even in challenging spaces.

Both models feature a unique pad control system that minimizes the risk of damage to the work surface. This innovative technology allows for a gradual start-up to reduce gouging, helping to maintain the integrity of the material being worked on. Additionally, the BO5030K comes with a dust bag that effectively collects sanding debris, keeping the work area clean and improving visibility. For those seeking a more efficient dust extraction, the sander is also compatible with a vacuum system.

Another noteworthy characteristic of the Makita BO5030K and BO5030 is the hook-and-loop abrasive paper system. This allows users to easily swap out sandpaper grits without the need for additional tools, saving time and optimizing productivity. They also come with a large 1/4-inch (6mm) random orbit sanding pad that effectively distributes the sanding motion, reducing swirl marks and producing a finer finish.

Built for durability, the BO5030K and BO5030 utilize high-quality materials to withstand the rigors of daily use. Their compact and lightweight design adds to their versatility, making them easy to transport and store. Whether working on furniture, cabinetry, or automotive projects, these sanders are equipped to deliver outstanding results.

In summary, the Makita BO5030K and BO5030 are highly efficient finishing sanders that boast powerful performance, ergonomic design, and user-friendly features. Their advanced dust collection systems, easy sandpaper attachment, and balanced motor make these tools ideal for both professional and home-based applications, embodying the Makita commitment to quality and innovation.