Replacing Belts
Many belts are available with different grit sizes.
To remove/replace a sanding belt:
1.DISCONNECT THE MACHINE FROM THE POWER SUPPLY!
2.Remove the star knob from the right-hand sanding belt cover as shown in Figure 16, and remove the cover.
Figure 16. Star knob removed.
3.Loosen the sanding belt tension knob, as shown in Figure 17.
Figure 17. Sanding belt tension knob.
-20-
4.Pull the sanding belt tension knob down with one hand and work the sanding belt off the rollers with the other hand as shown in Figure 18.
Figure 18. Removing sanding belt.
5.Install the new sanding belt in the reverse order of removal and replace the belt cover.
6.Track the new sanding belt as shown on Page 13 BEFORE turning the machine ON.
H7760 2" x 27" Belt Sander & 6" Grinder
