Grizzly H7760 owner manual Safety Instructions for Machinery

Page 7

SECTION 1: SAFETY

For Your Own Safety, Read Instruction Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

 

Indicates an imminently hazardous situation which, if not avoided,

 

 

WILL result in death or serious injury.

 

Indicates a potentially hazardous situation which, if not avoided,

 

COULD result in death or serious injury.

 

Indicates a potentially hazardous situation which, if not avoided,

 

MAY result in minor or moderate injury. It may also be used to alert

 

against unsafe practices.

NOTICE

This symbol is used to alert the user to useful information about

proper operation of the machine.

Safety Instructions for Machinery

1.READ THROUGH THE ENTIRE MANUAL BEFORE STARTING MACHINERY. Machinery presents serious injury hazards to untrained users.

2.ALWAYS USE ANSI APPROVED SAFETY GLASSES WHEN OPERATING MACHINERY. Everyday eyeglasses only have impact resistant lenses. They are NOT safety glasses.

3.ALWAYS WEAR AN ANSI APPROVED RESPIRATOR WHEN OPERATING MACHINERY THAT PRODUCES DUST. Wood dust is a carcinogen and can cause cancer and severe respiratory illnesses.

4.ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing damage.

5.WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts. Wear protective hair covering to con- tain long hair and wear non-slip footwear.

6.NEVER OPERATE MACHINERY WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS OR ALCOHOL. Be mentally alert at all times when running machinery.

H7760 2" x 27" Belt Sander & 6" Grinder

-5-

Image 7
Contents Model H7760 Page Table of Contents Foreword IntroductionContact Info Features Overall DimensionsMotor H7760 front view IdentificationSafety Instructions for Machinery SafetyAlways Lock Mobile Bases if Used Before Operating Machinery Additional Safety Instructions for Grinders Additional Safety Instructions for Sanders 110V Operation Circuit RequirementsInventory Qty SET UPUnpacking InventoryComponents and Hardware Required Qty Items Needed for Set UpMounting Description QtySpark Guard Eye Shield To install the tool restsTo install the spark guard and eye shield Tool RestsTo connect the dust port to a dust collection system Belt TrackingDust Port To track the sanding beltTest Run OperationOperating Grinder Before GrindingTo properly care for your wheel, follow these tips Wheel CareTo dress the grinding wheel Prefix Abrasive Grit Grade Bond Type Type Wheel Selection Wheel InspectionTo perform a Ring Test Wheel mounting order Replacing WheelsSanding a workpiece SandingTo remove/replace a sanding belt Replacing BeltsAccessories Grinding Wheels MaintenanceGeneral LubricationTroubleshooting ServiceParts Breakdown Description Parts ListWarranty and Returns Page Page