Sanyo SAP-KRV94EHDX service manual Auto, Heat, Dry, Cool, Fan

	Remote Control Unit (continued)
<Cover opened>
ON TIME/OFF TIME setting	No display: The timer does not operate.
buttons	: The air conditioner starts at the set time.
	: The air conditioner stops at the set time.
	: The air conditioner stops and starts, or starts and stops, at
	the set times every day. For details, see “Setting the Timer”.
MODE selector button	Use this button to select AUTO, HEAT, DRY, COOL or FAN mode.
(AUTO)	: When this setting is selected, the air conditioner calculates the
	difference between the thermostat setting and the room temperature
	and automatically switches to the ‘‘COOL’’ or ‘‘HEAT’’ mode as
	appropriate.
(HEAT)	: The air conditioner makes the room warmer.
(DRY)	: The air conditioner reduces the humidity in the room.
(COOL)	: The air conditioner makes the room cooler.
(FAN)	: The air conditioner works only as a circulation fan.
FAN SPEED selector button	: The air conditioner automatically decides the fan speeds.
	: High fan speed
	: Medium fan speed
	: Low fan speed

NIGHT SETBACK button For details, see “5. Night Setback Mode”. When you press this button in the HEAT, DRY or COOL mode, the mark appears in the display, and the remote control unit will automatically adjust the set temperature to save energy.

FLAP button Press the	button either to select the setting of the airflow direction to
(up/down) auto. flap in each mode or to one of the six possible positions from (2) to (7)
or to select the sweep function which moves the flap up and down
automatically.
: Auto flap setting: If selected in a heating operation, the flap is set to
position (3) in the following chart. If selected in a cooling or dry
operation, the flap is set at position (7) in the following chart.
: The airflow direction can be set at six positions from (2) to (7).
: The flap moves up and down automatically.

NOTE When you press the button, the air flow direction will change one by one as follows.

SWEEP

FLAP button Press the button either to select the setting of the airflow direction to (left/right) auto. flap in each mode or to one of the six possible positions from (2) to (7),

or to select the sweep function which moves the flap left and right automatically.

: Auto flap setting: The flap is set at position (4) in the following chart.

: The airflow direction can be set at six positions from (2) to (7). : The flap moves left and right automatically.

NOTE When you press the button, the airflow direction will change one by one as follows.

WIDE SWEEP

OI-791-9-EG 9