Sanyo SAP-KRV94EHDX service manual How to clean the air clean filter

Page 83

Care and Cleaning (continued)

Air Clean Filter The air clean filter removes dust and dirt from the air, and reduces odors and smoke from tobacco.

This air clean filter cannot remove harmful gases or vapors nor ventilate air in the room. You must open doors or windows frequently when you use gas or oil heating appliances. Otherwise there is a risk of suffocation in extreme cases.

How to install the air clean

The air clean filter needs to be installed behind the anti-mold filter.

filter

1.

Remove the anti-mold filter.

Air clean filter

 

2.

Install the air clean filter securely in

 

 

 

place onto the filter grille.

 

 

3.

Reinstall the anti-mold filter.

 

Filter grille

How to clean the air clean filter

NOTE

Cleaning the main unit and remote control unit

In general, the filter should be sucked to remove dust in low fan speed of a vacuum cleaner once every three months.

If there is heavily grime on the filter, soak the filter in lukewarm water with neutral detergent diluted 1:500 for 1 to 2 minutes then wash it.

Rinse the filter in clean water, then let it dry on the towel in room temperature.

Do not bend nor give excessive force onto the air clean filter.

If the filter surface is heavily blocked with dirt or damaged, replace it with new one. Purchase a replacement filter at your local dealer. (model STK- FDXB)

Wipe clean using a soft, dry cloth.

To remove stubborn dirt, moisten a cloth in warm water no hotter than 40 °C, wring thoroughly, and then wipe.

Cleaning the negative ion generator

Follow the steps below when the generator has become dirty.

For safety, be sure to turn the air conditioner off and also to disconnect the power before cleaning.

Remove the dust on the negative ion generator.

Use a toothbrush, etc. to dust off the end.

Use a cotton swab, etc., to clean around the generator inside the plastic case, taking care not to touch the electrodes.

Negative ion generator (metal electrodes inside plastic case)

NOTE

During use, the negative ion generator and other metal parts may become discolored: this is normal and not indicative of malfunctioning.

If the dirt on and around the negative ion generator is left to build up, a puffing or sputtering sound will eventually be heard. In this case, clean the generator immediately.

Do not apply excessive force while performing maintenance.

24

OI-791-24-EG

 

Image 83
Contents DC Inverter Split System AIR Conditioner Table of Contents Checking Electrical Components Please Read Before Starting For safe installation and trouble-free operation, you MustOperating Range Indoor Unit SAP-KRV94EHDX Unit SpecificationsOutdoor Unit SAP-CRV124EHDX SAP-KRV124EHDXSAP-KRV94EHDX Major Component SpecificationsCB-KRV124EHDX Outdoor Unit CB-CRV124EHDX Other Component Specifications Dimensional Data Dia .35 1/4 Indoor Unit SAP-KRV94EHDX Outdoor Unit SAP-CRV94EHDX Refrigerant Flow DiagramRefrigerant Flow Diagram Insulation of Refrigerant TubingPerformance Data Temperature ChartsIndoor Unit SAP-KRV124EHDX Outdoor Unit SAP-CRV124EHDX Air Throw Distance Charts Indoor Unit SAP-KRV124EHDX Heating Electrical CharacteristicsCooling SAP-CRV94EHDX SAP-KRV94EHDX SAP-CRV124EHDX SAP-KRV124EHDX Electric Wiring DiagramsOutdoor Unit Indoor Unit Installation Site Selection About Wiring System Diagram Recommended Wire Length and DiameterMounting on a Wall Remote Control Unit Installation PositionON/OFF How to Test Run the Air ConditionerHow to replace the grille Remove the Grille to Install the Indoor UnitHow to remove the grille Switching the remote controller address MaintenanceAddress Setting of the Remote Control Unit Removing and Mounting the Drain Hose Removing the Electrical Component Box Page Removing the Panel Motor Removing the Drain Pan Air Outlet Assy Removing and Mounting the Drain Pan Air Outlet AssyWater in the drain pan Mounting the Drain Pan Air Outlet AssyRemoving the Negative Ion Generator Mounting the Fan Motor Removing and Mounting the Fan MotorRemoving the Fan Motor Removing the Fan How to Connect How to DisconnectAuto cooling/heating operation FunctionsOperation Functions Emergency operationLamp colors Timer backupFreeze prevention Compressor discharge temperature controlProtective Functions Overload prevention during heatingNon-Stop Defrosting Mode CoolingMode Heating Method of Self-Diagnostics TroubleshootingPrecautions before Performing Inspection or Repair ION Timer Operation Self-diagnostics LampsChecking the Indoor and Outdoor Units Trouble Diagnosis of Indoor and Outdoor Fan Motor Diagnostic procedureDiagnostic results Remedy for symptom 3 toOutdoor Fan Motor Electromagnetic interference Noise Malfunction and Electromagnetic InterferenceNoise malfunction Upper right screw Grille Screw Flap Screw cover Making a Diagnosis of the Panel Motor Measurement of Insulation Resistance Checking Electrical ComponentsChecking Continuity of Fuse on PCB Assy Size of flare Refrigerant R410A Special Precautions When Servicing UnitCharacteristics of New Refrigerant R410A Checklist before ServicingIf refrigerant R410A is exposed to fire Tubing precautionsNo addition of compressor oil for R410A No use of refrigerant other than R410ATool Distinction Tool Name Tubing Installation ProceduresTools Specifically for R410A For servicing, use the following tools for R410ACase of Compressor Malfunction Procedure for Replacing CompressorUnit. This may cause Configuration and characteristics of cylindersRecharging Never charge a large amountWelding leaking points Case Refrigerant is LeakingUse of Existing Units When Tubes are ExtendedCharging Additional Refrigerant Retro-Fitting Existing SystemsOI-852-6-4180-791-00-0 Child Lock FeaturesProduct Information ContentsAlert Symbols Electrical Requirements Installation LocationSafety Instructions Names of Parts Unit Display and Operation Button Remote Control Unit Display Remote Control Unit Cool AutoHeat DRYONE TIME/EVERYDAY Using the Remote Control UnitControl Unit Using the Remote Control UnitRemote control unit mount Mounting screws 4 x 16 included Press the ON/OFF operation button Operation with the Remote Control UnitStep StepCover closed Cover opened Step Operation with the Remote Control UnitAdjusting the Fan Speed Setting Temperature Cooling and DRY ModeNight Setback Mode is used for saving energy SettingQuiet Mode Special Remarks Operation Indication Setting the TimerExample To set to OFF Setting the TimerTo cancel a timer program Press the Cancel button 2230 610 2000 Present timeOperation together with the Daily ON/OFF Repeat Timer Using the 1.2.3.5-Hour OFF TimerSetting procedure Cancellation procedureFAN Heat Adjusting the Airflow DirectionSweep Indoor Unit Care and CleaningFilter Care and CleaningHow to replace the anti-mold Remounting the front panelNegative ion generator metal electrodes inside plastic case How to clean the air clean filterTrouble Possible Cause Remedy TroubleshootingOperating Range Osaka, Japan Sept

SAP-KRV94EHDX specifications

The Sanyo SAP-KRV94EHDX is a cutting-edge split-type air conditioning unit that exemplifies advanced technology and efficiency. Designed for both residential and commercial spaces, this model is equipped with features that cater to various cooling and heating needs.

One of the main highlights of the Sanyo SAP-KRV94EHDX is its energy efficiency. With a high Energy Efficiency Ratio (EER), this unit minimizes energy consumption while maximizing cooling performance. This not only results in lower electricity bills but also contributes to a reduced carbon footprint, making it an environmentally friendly choice for users.

The SAP-KRV94EHDX employs inverter technology, which allows the compressor to adjust its speed dynamically based on the temperature requirements of the environment. This means that the unit operates more quietly and uses less energy when maintaining a consistent temperature. The inverter system ensures that the air conditioner can quickly reach the desired cooling or heating temperature and maintain it without the frequent on-off cycles typical of traditional units.

Additionally, the air conditioning unit comes with a powerful cooling capacity, effectively managing larger spaces. It can easily handle varying ambient conditions while providing rapid cooling in extremely warm weather, making it perfect for areas with hot climates.

Other notable features include a user-friendly remote control, allowing users to adjust settings from a distance effortlessly. The unit also incorporates a multi-stage air filtration system designed to remove dust, allergens, and other airborne particles, contributing to better indoor air quality.

The Sanyo SAP-KRV94EHDX is not just about functionality; it also boasts a sleek and modern design that blends seamlessly with various interior aesthetics. Its quiet operation ensures that it does not disturb daily activities, making it suitable for bedrooms, offices, and living spaces.

Moreover, the unit comes with various operational modes, including cooling, dehumidification, and a heating function. This versatility makes the SAP-KRV94EHDX an all-season solution for climate control.

In summary, the Sanyo SAP-KRV94EHDX is a top-tier air conditioning unit that combines efficiency, advanced technology, and user convenience. Its inverter technology, multi-stage air filtration, and modern design make it a reliable choice for anyone seeking comfort throughout the year.