Using the Remote Control Unit

Remote Control Unit (continued)

SENSOR button		When you press this button (use a small-tipped object such as a ballpoint
		pen), the	mark will appear at the display. And the room temperature is
		detected by the sensor which is built into the indoor unit and the air
		conditioner is controlled accordingly.
		If the remote control is located near a heat source, such as a space heater or
	NOTE
		in direct sunlight, press the SENSOR button to switch to the sensor on the

		indoor unit.

Temperature Display Selector		This switches the temperature display between °C and °F.
	button

Time Display Selector button		This switches the time display between 24-hour time and 12-hour time.

TIMER Selector button		This button switches ONE TIME or EVERYDAY. When you select
(ONE TIME/EVERYDAY)		EVERYDAY,	is displayed and continuously operates this function
		everyday. The initial setting is EVERYDAY. If you select ONE TIME, it
		operates until setting time of timer.

CANCEL button		If you want to cancel the setting time of ON or OFF, press the ON or OFF button
		first, then press the CANCEL button. The CANCEL function is invalid for the
		1.2.3.5HR. TIMER.

CLOCK button		The CLOCK button is used to set the present time. Press the CLOCK button
		first, then select the advance or return keys on the ON or OFF TIME setting
		button. Press the CLOCK button again to set adjusted present time.

CHILD LOCK button		The CHILD LOCK button is used to tamperproof and protect the unit from
		being incorrectly operated. The setting or canceling this function is effected
		by pressing the button for at least two seconds.The initial setting is set to
		CHILD LOCK off.
		: CHILD LOCK on.
		All key access functions are invalid while the CHILD LOCK function is on.
	NOTE


ADDRESS switch		• The ADDRESS switch changes to prevent mixing of signals from remote
		control units when two air conditioners are installed next to each other.
		The ADDRESS switch is located inside of rear cover on the remote
		control unit, and is set to A. For more information, please contact the
		dealer where you made the purchase.
		• Normally, tab on the remote control unit should not be bent.

NOTE

The remote control unit sends the temperature signal to the air conditioner regularly at five minute intervals. If the signal from the remote control unit stops for more than 15 minutes due to the loss of the remote control unit or other trouble, the air conditioner will switch to the temperature sensor which is built into the indoor unit and control the room temperature. In these cases, the temperature around the remote control unit may differ from the temperature detected at the air conditioner’s position.

How to Install Batteries

1. Slide the cover in the direction indicated by the arrow and remove it.

2. Install two AAA alkaline batteries. Make sure the batteries point in the direction marked in the battery compartment.

10	OI-791-10-EG

SAP-KRV94EHDX specifications

The Sanyo SAP-KRV94EHDX is a cutting-edge split-type air conditioning unit that exemplifies advanced technology and efficiency. Designed for both residential and commercial spaces, this model is equipped with features that cater to various cooling and heating needs.

One of the main highlights of the Sanyo SAP-KRV94EHDX is its energy efficiency. With a high Energy Efficiency Ratio (EER), this unit minimizes energy consumption while maximizing cooling performance. This not only results in lower electricity bills but also contributes to a reduced carbon footprint, making it an environmentally friendly choice for users.

The SAP-KRV94EHDX employs inverter technology, which allows the compressor to adjust its speed dynamically based on the temperature requirements of the environment. This means that the unit operates more quietly and uses less energy when maintaining a consistent temperature. The inverter system ensures that the air conditioner can quickly reach the desired cooling or heating temperature and maintain it without the frequent on-off cycles typical of traditional units.

Additionally, the air conditioning unit comes with a powerful cooling capacity, effectively managing larger spaces. It can easily handle varying ambient conditions while providing rapid cooling in extremely warm weather, making it perfect for areas with hot climates.

Other notable features include a user-friendly remote control, allowing users to adjust settings from a distance effortlessly. The unit also incorporates a multi-stage air filtration system designed to remove dust, allergens, and other airborne particles, contributing to better indoor air quality.

The Sanyo SAP-KRV94EHDX is not just about functionality; it also boasts a sleek and modern design that blends seamlessly with various interior aesthetics. Its quiet operation ensures that it does not disturb daily activities, making it suitable for bedrooms, offices, and living spaces.

Moreover, the unit comes with various operational modes, including cooling, dehumidification, and a heating function. This versatility makes the SAP-KRV94EHDX an all-season solution for climate control.

In summary, the Sanyo SAP-KRV94EHDX is a top-tier air conditioning unit that combines efficiency, advanced technology, and user convenience. Its inverter technology, multi-stage air filtration, and modern design make it a reliable choice for anyone seeking comfort throughout the year.

Remote Control Unit (continued)

(ONE TIME/EVERYDAY)

EVERYDAY,

CLOCK button

ADDRESS switch