Harbor Freight Tools 98198 operating instructions For technical questions, please call

Page 14

Test by pressing in the middle with a moderate amount of force.

b. Turn off the sander and un-plug the power cord.

c. Remove the pulley/V-Belt Side Cover (82).

d. Check the V-Belts for signs of wear, deterioration or cracking. If any signs are visible, replace with a new belt.

e. The Feed V-belt (99) is tensioned by loosening the Motor Bracket (100) screws and sliding the motor down- ward to tighten the V-Belt.

f.The Drive V-Belt (97) is tensioned by pressing the tensioner Roller

(255)against the V-belt, increasing pressure until the V-belt is of proper tension.

g.These V-Belts are subject to stretch- ing and loosening, so they must be checked on a regular basis and tensioned whenever necessary.

h.Replace the pulley/V-Belt Side Cover

SKU 98198

For technical questions, please call 1-800-444-3353.

Page 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsContents General Power Tool Safety Save This ManualGfci reduces the risk of electric shock Drum Sanding Operation Safety Warnings For technical questions, please call Grounding Plug and OutletSymbology Extension CordsAssembly SpecificationsList of contents UnpackingOperating Instructions Final AssemblyTool Set Up MountingDepth of cut Work Piece and Work Area Set UpGeneral Operating Instructions Dust BagSandpaper replacement Tools supplied Speed adjustmentSandpaper grit selection chart Grit Class Sanding tipsSanding Belts Cleaning the machineLubrication Belt TensioningFor technical questions, please call Maintenance Servicing Cleaning and MaintenanceFeed Belt Tracking Replacing V-beltsPulley Alignment Check rear of the Pressure Plate Adjustment Feed Belt ReplacementConveyor Table Adjustments Check front of the Pressure Plate adjustmentTo adjust the rear Pressure Plate To adjust the front of the Pressure PlateMotor Thermal Circuit Breaker White Black GroundTroubleshooting Problem Possible Causes Likely SolutionsSanding Operations Problem Possible Causes Likely Solutions Please Read the Following Carefully Part Part Name BELTA46 Head Cover Handle Bushing Assembly Diagram Limited 1 year / 90 Day warranty Record Product’s Serial Number Here
Top Page Image Contents