5.To adjust the rear Pressure Plate:
a.Disconnect the power cord from the outlet.
b.Loosen the lock nuts and tighten the cap screws on both ends of the rear of the Pressure Plate (84) to raise or loosen to lower the plate.
c.Adjust until the rear of the Pressure Plate (84) until it is at or up to 0.004” lower than the drum.
To adjust the front of the Pressure Plate:
d.Disconnect the Drum Sander.
e.Loosen the lock nuts and tighten the cap screws on both ends of the front of the Pressure Plate to raise the plate or loosen to lower.
f.Adjust until the front of the Pressure Plate is up to 0.004" lower than the drum.
SKU 98198 | For technical questions, please call | Page 18 |