Specifications
Maximum Stock Width | 18" (36” two passes) | |
|
| |
| ||
Sanding Motor | Fan Cooled Induction | |
| Motor | |
Stock Thickness Range | 1/8" to | |
Electrical Requirements | 120 V~ / 60 Hz / 15A | |
Sanding Drum Speed | 4,000 RPM | |
Dust Collection | ||
fan | ||
| ||
Conveyor Belt speed | Range from 2 - 12 FPM | |
Net Weight | 300 LBS |
subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
List of contents
Description | Qty |
Drum Sander - | 1 |
Dust Bag (273) | 1 |
Dust Hose Collar (218) | 1 |
Square Dust Port (56) | 1 |
Hex Key 4mm, 5mm, 6mm | 3 |
Double | 1 |
Some tools may not be supplied
Instructions for putting into use
Read the entire Important Safety Information section at the beginning of this manual including all text under
Assembly
The Drum Sander.
a.The Drum Sander comes 95% pre- assembled.
Assemble the stand.
a. It is easier to assemble upside down.
Stand Leg (263)
Lower Long Bracket (266)
Upper Long Bracket (264)
Fig. 1
b. Mount an Upper (264) and Lower Long Bracket (266) to a Stand Leg (263) and loosely attach (See Fig. 1)
SKU 98198 | For technical questions, please call | Page 9 |