5.Remove the Foam Pad (44) from the Polishing Pad (2) when the Polisher/Sander is not in use. This will allow the Polishing Pad to dry and retain its original shape. Wash with mild soap and water before storing.
6.To prolong Polishing Pad (2) life and shape, store the Polisher Pad face down to keep the surface flat.
7.The Polishing Bonnet (45) may be machine washed in cold water with mild detergent. Then hang dry.
8.Use only a clean cloth and mild detergent to clean the body of the Polisher. Do not use solvents. Do not immerse any part of the tool in liquid.
9.Over time, if the performance of the tool diminishes, or it stops working completely, it may be necessary to replace the Carbon Brushes (31) by removing the Brush Holder Cover (30). This procedure should be completed by a qualified technician. If the Carbon Brushes are not worn down, try cleaning the Carbon Brush tips with an ink eraser.
PARTS LIST
Part | Description | Q'ty |
|
|
|
1 | Hex Key | 1 |
|
|
|
2 | Pad, Polishing | 1 |
|
|
|
3 | Spindle | 1 |
|
|
|
4 | Key, Half Circle, 4x13 | 1 |
|
|
|
5 | Screw, 5x16 | 4 |
|
|
|
6 | Washer, Spring | 4 |
|
|
|
7 | Cover, Front | 1 |
|
|
|
8 | Bearing, # 201 | 1 |
|
|
|
9 | Ring, Fender, 32 | 1 |
|
|
|
10 | Gear, Large | 1 |
|
|
|
11 | Ring, Fender, 12 | 1 |
|
|
|
12 | Sleeve, Steel, 115B, 12x8x10 | 1 |
|
|
|
13 | Screw, Tap, 5x30 | 4 |
|
|
|
14 | Head Shell | 1 |
|
|
|
15 | Pin, Lock | 1 |
|
|
|
16 | Spring, Lock | 1 |
|
|
|
17 | Cap, Spindle Lock | 1 |
|
|
|
18 | Screw, Hex Head, 8x16 | 2 |
|
|
|
19 | Handle | 1 |
|
|
|
20 | Bearing, # 101 | 1 |
|
|
|
21 | Cover, Triangle Press | 1 |
|
|
|
22 | Washer, Spring, 4 | 3 |
|
|
|
23 | Screw, 4x10 | 3 |
|
|
|
24 | Armature | 1 |
|
|
|
Part | Description | Q'ty |
|
|
|
25 | Bearing, # 18 | 1 |
|
|
|
26 | Ring, Wind Shield | 1 |
|
|
|
27 | Screw, Tap, 5x55 | 2 |
|
|
|
28 | Stator | 1 |
|
|
|
29 | Spring, # 110 | 2 |
|
|
|
30 | Cover, Brush Holder | 2 |
|
|
|
31 | Brush, Carbon, # 4100 | 2 |
|
|
|
32 | Holder, Brush, # 4100 | 2 |
|
|
|
33 | Housing, Motor | 1 |
|
|
|
34a | Cover, Upper Back | 1 |
|
|
|
35 | Screw, Tap, 3x10 | 2 |
|
|
|
36a | Switch | 1 |
|
|
|
37a | Speed Adjustment | 1 |
|
|
|
38a | Cover, Lower Back | 1 |
|
|
|
39 | Screw, 4x20 | 4 |
|
|
|
40 | Sheath, # 125 | 1 |
|
|
|
41 | Cord, Power | 1 |
|
|
|
42 | Press Cable Board | 1 |
|
|
|
43 | Screw, Tap, 4x14 | 2 |
|
|
|
44 | Foam Pad | 1 |
|
|
|
45 | Polishing Bonnet | 1 |
|
|
|
46 | Terry Cloth Bonnet (not shown) | 1 |
|
|
|
47 | Sanding Disk, 60 Grit | 1 |
|
|
|
48 | Sanding Disk, 240 Grit | 1 |
|
|
|
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
REV 01/05
SKU 92623 For technical questions, please call
English
Page 12