|
|
| SPECIFICATIONS |
|
|
|
|
|
|
| Item |
| Description |
|
| Power Requirement | 120 VAC, 10 amps (input), 60 Hz |
| |
| Speed | 200 to 3377 RPM; Variable |
| |
| Disc Size | 7 inches |
| |
| Spindle Size | 5/8 inches – 11 TPI |
| |
| Line Cord | 6 feet; | E194601 | |
| Weight | 6.6 lbs. | ||
| Accessories | 2 – Sanding Disks: 60 and 240 grit |
| |
|
| 1 | – Foam Pad |
|
|
| 1 | – Terry Towel |
|
|
| 1 | – Polishing Bonnet |
|
|
| 1 | – Polishing Pad |
|
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTION
Work Area
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.
English
SKU 92623 For technical questions, please call
Page 2