Jet Tools 22-44 Pro Install Handwheel, Install Conveyor Table, Infeed and Outfeed Tables Optional

Page 10

2.Re-tighten the set screw with your fingers until it only lightly touches the column tube.

3.Hold the set screw in position with the hex wrench, and re-tighten the hex nut.

Install Handwheel

Mount the handwheel to the top of the height adjustment screw (Figure 6). Align one of the set screws with the flat on the height adjustment screw, and tighten both set screws.

Install the knob to the threaded hole in the handwheel, and tighten the hex nut against the handwheel.

Install Conveyor Table

1.Lower the table mounting brackets by rotating the handwheel.

2.Remove conveyor table from packaging, and place it on the mounting brackets of the stand. The gear motor should be on the right, or inboard side of the sander as shown in Figure 7.

3.Secure the conveyor bed with four 3/8”x1” hex head bolts, 3/8” flat washers and 3/8” flanged lock nuts.

4.Plug the motor cord into the control box receptacle (Figure 8).

IMPORTANT: The conveyor belt has been overtightened for shipping purposes. It must be tensioned properly before operating the sander! See page 19.

Infeed and Outfeed Tables (Optional

Accessory)

See Figure 9.

1.Remove the lower hex cap screw (A) and square nut (B) from the rail on the infeed side of the sander.

2.Slide a left hand mounting bracket (C) into the end of the rail.

3.Align holes and re-install the hex cap screw

(A)and square nut (B). Install a 3/8”x1” hex head bolt (D), 5/16” flat washer (E) and flanged lock nut (F).

4.Tighten the hex cap screw (A) first to align the bracket, then tighten the flanged hex nut

(F)on the 3/8” screw.

5.Install a right hand mounting bracket (G) in the same manner. NOTE: You will have to open the control box to remove the screw from the rail – remove the front lower screw and base panel (# 16 on page 38) of the control box.

Figure 6

Figure 7

Figure 8

Figure 9

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Drum Sander Warranty and Service Table of Contents Page Page Introduction Specifications 44 2 passesFeatures and Terminology Contents of the Shipping Container UnpackingInstall Stand Legs AssemblyTable Support Screws Install Conveyor Table Install HandwheelInfeed and Outfeed Tables Optional Leveling the Sander Dust CollectionInstalling Abrasives Page Grounding Instructions Extension Cords AdjustmentsSwitch Lockout Dust CoverPage Depth Gauge Calibration Drum AlignmentInitial Drum Alignment Conveyor Belt Tension and Tracking Conveyor Belt Replacement TrackersTension Roller Adjustment Adjusting Table SupportsReplacing V-Belt Rotating Drum BearingsReplacing Drum Bearings Operation Dust Collection Maintenance Keeping the Machine CleanTracker Kit Underside of conveyor shownAbrasives Abrasive Selection GuideTroubleshooting Motor and Electrical Problems Trouble Troubleshooting Operational Problems Trouble Probable Cause Remedy Optional Accessories Replacement PartsStand Assembly Parts List Stand Assembly Index No. Part No Description Size QtyDrum Head Assembly Parts List Drum Head Assembly Conveyor and Motor Assembly Parts List Conveyor and Motor Assembly Infeed and Outfeed Tables 98-2201 Optional Accessory Electrical Connections Page Page WMH Tool Group

22-44 Pro specifications

The Jet Tools 22-44 Pro drum sander stands out as one of the leading machines in the woodworking industry, known for its exceptional performance and durability. Aimed at both professional woodworkers and serious hobbyists, this tool boasts a range of features that enhance efficiency and precision, making it a valuable addition to any workshop.

One of the primary features of the Jet 22-44 Pro is its powerful 1.75 HP motor. This motor ensures consistent and reliable operation, allowing users to tackle a variety of sanding tasks with ease. The machine operates at 1,800 RPM, providing quick and efficient material removal. The adjustable table height allows for a maximum sanding width of 22 inches, accommodating larger workpieces for versatility in projects.

In terms of technology, the Jet 22-44 Pro employs a unique, patented drum design that ensures even sanding across the entire surface. This design minimizes the risk of snipe, a common problem in sanders that can result in uneven finish on workpieces. The 44-inch long sanding drum provides ample surface area, which aids in achieving a flawless finish without the need for excessive passes.

The tool features an adjustable infeed and outfeed table, ensuring optimal material support and stability during sanding operations. This feature is particularly beneficial for larger boards, as it prevents warping and allows for more accurate sanding. Additionally, the integrated dust collection system enhances cleanliness by efficiently capturing dust and debris, promoting a healthier working environment.

The Jet 22-44 Pro is equipped with a micro-adjustable sanding drum, allowing users to make precise depth adjustments for different applications. This functionality makes it easy to switch between various grits without sacrificing accuracy. Furthermore, the machine’s sturdy construction and robust frame reduce vibration during operation, contributing to improved accuracy and reduced fatigue during prolonged use.

The user-friendly design of the Jet 22-44 Pro also includes safety features such as an emergency stop button and integrated overload protection. This ensures that the machine can be operated safely, with features in place to prevent damage to both the tool and the user.

In summary, the Jet Tools 22-44 Pro drum sander combines power, versatility, and advanced technology to deliver an outstanding finishing tool for woodworkers. Its robust motor, unique drum design, and user-friendly features make it a top choice for anyone looking to enhance their woodworking capabilities.
Top Page Image Contents