Juniper Networks E-Series manual Installing a Cable-Management Bracket on ERX-7xx Models

9-16

CHAPTER 9

Maintaining E-Series Routers

Installing a Cable-Management Bracket on ERX-7xx Models

Front of

ERX-7xx model

A cable-management bracket can be installed to accommodate cables of different sizes on ERX-7xx models. See Figure 9-10.

•For wider X.21/V.35 cables, mount the bracket in the last row of perforation holes in the chassis so that the bracket allows for maximum spacing (A).

•For smaller cables, mount the bracket closer to the front of the chassis

(B).

Use two (2) #10 self-tapping screws to secure the bracket.

Mount in this area for smaller cables

Mount here for wider X.21/V.35 cables

Perforated area

g013767

Figure 9-10Attaching a cable management bracket