Juniper Networks E-Series manual Replacing an NVS Card

Upgrading NVS Cards on SRP Modules E-Series Routers

9-5

Replacing an NVS Card

To replace an NVS card on an SRP module:

1Obtain an antistatic container for the NVS card you will remove (see Storing Modules and Components, earlier in this chapter).

2With a small flathead screwdriver, remove the faceplate from the NVS card slot on the SRP module (see Figure 9-1).

3Use the screwdriver to depress the button next to the NVS card (see Figure 9-1).

This action releases the NVS card.

NVS card

Faceplate

Release button

Figure 9-1NVS card slot on SRP module

g013763

4Remove the NVS card and place it in the antistatic container.

5Insert the new NVS card into the slot.

6Push the new NVS card as far as you can in the slot.

When you push the card far enough, it will click into place.

7Replace the faceplate on the NVS card slot.