Juniper Networks E-Series manual 4XOC3 Asic

Table 12-3I/O module specifications (continued)

		Model	SRP Module	No. of
I/O Module Labela	Type	Compatibility	Compatibility	Ports	Connector Type			Cabling Specifications
OC3	Obsolete, no longer supported
I/O
SINGLE
MODE
OC3/STM1 ATM						•
OC3-4	ASIC	ERX-7xx models	SRP-5G+	4	SC full duplex	•	Tx power:
I/O		ERX-14xx models	SRP-10G				›	min: –19 dBm
MULTI		ERX-310 router	SRP-40G				›	max: –14 dBm
MODE			SRP-40G+			• Center wavelength: 1310 nm
			SRP-SE10G			•	Rx input power:
							›	min: –30 dBm
							›	max: –14 dBm
						• Rated for 2 km (1.2 miles) over
							62.5-micron core cable with an
							optical loss of 0–9 dB or
							50-micron core cable with an
							optical loss of 7 dB
4XOC3	ASIC	ERX-700 series	SRP-5G+	4 active	LC full duplex	•	Tx power:
APS		ERX-1400 series	SRP-10G	4 redundant			›	min: –19 dBm
I/O		ERX-310 system	SRP-40G				›	max: –14 dBm
MULTI			SRP-40G+			• Center wavelength: 1310 nm
MODE
			SRP-SE10G			•	Rx input power:
							›	min: –30 dBm
							›	max: –14 dBm
						• Rated for 2 km (1.2 miles) over

62.5-micron core cable with an optical loss of 0–9 dB or

50-micron core cable with an optical loss of 7 dB

I/O Module Specifications 12-25E-Series Routers