Juniper Networks E-Series manual Installing SRP I/O and SRP Modules Series Routers

Œ

Opened

•

Closed

•

Closed

Œ

Opened

Installing SRP I/O and SRP Modules	5-9
E-Series Routers

g013746

Figure 5-5Ejectors in the open position

6Slide the module into the chassis by placing it between the guides of the selected slot and pushing the module until it stops.

The module stops sliding when the ejectors make contact with the front of the chassis.

Caution: If you meet strong resistance when attempting to seat the module using the ejectors, remove it from the chassis and confirm that the slot is one designed to hold the module. Also, be sure that you have aligned the top and bottom edges in the correct matching tracks.

7Insert the module into the backplane by simultaneously depressing both ejectors (as shown in Figure 5-5) and exerting forward pressure on the module.