
APPENDIX B
Installing JUNOSe Software
The procedures for transferring release files from a source
Note: You must enable the FTP server on the source
To transfer release files from a source
Firewall Does Not Exist, with the following changes:
•Substitute the source
•Omit the step about mounting the CD.
•Copy the file to the system space of the second
host1#copy
Upgrading Systems That Are Operating with Two SRP Modules
Use this procedure if the system contains two SRP modules and is already operating with an earlier software release. Each SRP module will keep the system operational while you upgrade the software on the other, so that you can avoid interrupting service.
Caution: You must upgrade the software on the redundant SRP module when you upgrade the software on the primary SRP module. This action prevents the redundant SRP module from overwriting the new software on the primary SRP module if the primary SRP module fails and the redundant SRP module assumes control.
To upgrade the software on a system that is operational and contains two
SRP modules:
1Turn off autosynchronization.
2Copy the new release of the software to NVS of the primary SRP module.
•If a firewall separates the