Juniper Networks E-Series manual Appendix B Installing JUNOSe Software, Xiv

xiv

Contents

Appendix B Installing JUNOSe Software

	Overview	B-1
	Identifying the Software Release File	B-2
	Installing Software When a Firewall Exists	B-2
	Task 1: Obtain the Required Information	B-3
	Task 2: Divert Network Traffic to Another Router	B-3
	Task 3: Access Privileged Exec Mode	B-4
	Task 4: Configure IP on an Interface	B-4
	Task 5: Mount the CD on the Network Host	B-4
	Task 6: Configure Access to the Network Host	B-5
	Task 7: Enable the FTP Server on the E-Series Router	B-6
	Task 8: Identify the Files to Transfer	B-6
	Task 9: Transfer Files to the User Space	B-6
	Task 10: Install Files on the System Space	B-6
	Task 11: Save the Current Configuration	B-7
	Task 12: Reboot the System	B-7
	Installing Software When a Firewall Does Not Exist	B-8
	Installing Software in Normal Operational Mode	B-8
	Task 1: Obtain the Required Information	B-9
	Task 2: Divert Network Traffic to Another Router	B-9
	Task 3: Access Privileged Exec Mode	B-9
	Task 4: Configure IP on an Interface	B-9
	Task 5: Configure Access to the Network Host	B-10
	Task 6: Mount the CD on the Network Host	B-11
	Task 7: Copy the Software Release File	B-11
	Task 8: Save the Current Configuration	B-11
	Task 9: Reboot the System	B-12
	Installing Software in Boot Mode	B-13
	Task 1: Obtain the Required Information	B-13
	Task 2: Divert Network Traffic to Another System	B-13
	Task 3: Access the Boot Mode	B-13
	Task 4: Assign an IP Address	B-14
	Task 5: Configure Access to the Network Host	B-14
	Task 6: Mount the CD on the Network Host	B-14
	Task 7: Copy the Software Release File	B-14
	Task 8: Reboot the System	B-15
	Copying Release Files from One E-Series Router to Another	B-15
	Upgrading Systems That Are Operating with Two SRP Modules	B-16
Appendix C	Customer Support
	Contact Information	C-1
	Information You Need to Supply	C-2
	Returning Products for Repair or Replacement	C-3

Appendix D Declaration of Conformity

Index