Juniper Networks E-Series manual Tsm, 21/V.35

Table 12-1Module functionality (continued)

Release Information

Module Assembly			Line Module	I/O Module	First	Final
Name	Description	Capability	Label	Label	Supporteda	Supported
T3 FRAME (12 ports)	Unchannelized T3 for Frame	DS3	COCX-F3	CT3/T3	4.0.2	N/A
		Subrate DS3		12
				I/O
		HDLC Framing
TSM
TSM	Tunnel Service for IP tunnels, L2F	IP Tunnels	TUNNEL	No I/O module	3.0.2	N/A
	tunnels and LNS termination	LNS termination	SERVICE
X.21/V.35
X.21/V.35	X.21/V.35 synchronous serial	HDLC	X.21/V.35-	X.21/V.35-16	2.10.1, 3.3.2	N/A
	interface		16	I/O

a.A release may support multiple versions of a module. For information, see Software Compatibility in E-Series System Basics Configuration Guide, Chapter 5, Managing Line Modules and SRP Modules.

b.This module assembly can use either the 128-MB GE/FE line module or the 256-MB GE/FE line module.

c.The 256-MB GE/FE line module was first supported in Release 5.0.0.

d.The GE SFP I/O module uses a range of simple form-factor pluggable transceivers (SFPs) to support different modes and cable lengths.

e.Assembly is superseded by a newer assembly; however, assembly is supported by current software.

f.This module assembly can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx/DS3-ATM line module.

g.The 256-MB OCx/STMx/DS3-ATM line module was first supported in Release 5.0.0.

12-12CHAPTER 12 Module Specifications