10-4CHAPTER 10 Troubleshooting

Table 10-2LED identification and activity descriptions (continued)

LED Location

LED Label

LED Indicator

LED Color

OFF to ON

ON to OFF

Ethernet line

LINK

Ethernet

Green

Ethernet link up

Ethernet link down

modules

 

 

 

 

 

ACTIVITY

Ethernet

Green

Blinks when Ethernet

No Ethernet traffic

 

 

 

 

 

traffic on link

on link

 

 

 

 

 

 

 

 

 

 

 

HSSI line

SYNC

Port status

Green

If the port is configured

If the port is configured

module

 

 

 

as DTE, the LED lights

as DTE, the LED goes

 

 

 

 

when both the DCE and

out when either the DCE

 

 

 

 

the clock source are

or the clock source

 

 

 

 

available.

becomes unavailable.

 

 

 

 

If the port is configured

If the port is configured

 

 

 

 

as DCE, the LED lights

as DCE, the LED goes

 

 

 

 

when the DTE is

out when the DTE

 

 

 

 

available.

becomes unavailable.

 

YEL ALM

Note: This LED is not functional on the HSSI line module.

 

RED ALM

Port status

Red

If the port is configured

If the port is configured

 

 

 

 

as DTE, the LED lights

as DTE, the LE goes out

 

 

 

 

when either the DCE or

when both the DCE and

 

 

 

 

the clock source

the clock source are

 

 

 

 

becomes unavailable.

available.

 

 

 

 

If the port is configured

If the port is configured

 

 

 

 

as DCE, the LED lights

as DCE, the LED goes

 

 

 

 

when the DTE becomes

out when the DTE is

 

 

 

 

unavailable.

available.

X.21/V.35 line

ACTIVE

Port status

Green

Port configured

Port not configured

module

 

 

 

 

 

LOOPBK

Port status

Yellow

Port in local loopback or

Port not in loopback

 

 

 

 

 

remote loopback,

 

 

 

 

 

depending on the type of

 

 

 

 

 

connection. (See)

 

 

ERROR

Port status

Red

Port is enabled or comes

Port is disabled or goes

 

 

 

 

online

offline

 

V.35

Port status

Green

V.35 cable connected

V.35 cable disconnected

 

 

 

 

 

 

 

X.21

Port status

Green

X.21 cable connected

X.21 cable disconnected

 

 

 

 

 

 

 

DCE

Port status

Green

DCE cable connected

DCE cable disconnected

 

 

 

 

 

 

 

DTE

Port status

Green

DTE cable connected

DTE cable disconnected

 

 

 

 

 

 

Other line

SYNC

Port status

Green

In frame

Not in frame

modules

 

 

 

 

 

YEL ALM

Port status

Yellow

Far end receive failure

No FERF present

 

 

 

 

 

(FERF) exists

 

 

 

 

 

 

 

 

RED ALM

Port status

Red

Loss of sync/frame

In frame

 

 

 

 

 

 

The following figures show a representative module for each of the three variations:

SRP module (Figure 10-1)

Page 126
Image 126
Juniper Networks E-Series manual Active