CHAPTER 5 Installing Modules
•
Opened
Œ
Closed
Œ
Closed
• | g013747 | |
Opened | ||
|
Figure 5-6 Ejectors in the closed position
5Carefully slide the module out of the chassis.
6Place the module in its antistatic bag.
7Cover the empty chassis slot with a blank faceplate, and tighten the faceplate’s captive screws using a Phillips screwdriver. Turn both screws several times before tightening them completely.
If you remove an I/O module and not the corresponding line module, the line module reboots. Its status becomes “inactive” when you issue the show version command.
If you remove a line module and do not delete the corresponding configuration, the status of the line module will be “not present” when you issue the show version command.
